User manual JVC HR-XV2

[. . . ] DVD PLAYER/VIDEO CASSETTE RECORDER HR-XV2EK VCR DVD POWER TV DVD MENU MEMORY SEARCH EJECT PAL RETURN SUBTITLE DISPLAY ANGLE REPEATA-B ZOOM TITLE REPEAT SHOWVIEW 1 4 7 0 2 5 8 TV 3 VIDEO Plus+ 6 9 TV TV/VCR TV/VCR PR + OK 0000 CANCEL TV/VCR PR OM RAND AUX AUDIO MONITOR PROG. OWNER'S MANUAL P/N : 3834RP0093F LPT0822-001A Safety Precautions / Important WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN Notes on copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyright material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. This product incorporates copyright protection technology that is protected by method claims of certain U. S. [. . . ] Ratings 1 to 8: Some discs contain scenes not suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback will stop. You must enter the 4-digit password or change the rating level in order to play the disc. OK to your rating 5 Press SETUPconfirm the menu. selection, then press to exit If you forget your 4-digit code If you forget your password, to clear the current password, follow the procedure below. 1 Press SETUP to display the setup menu. 2 Use the Number buttons to enter the 6-digit number "210499". The 4-digit password is cleared. 3 Enter a new code as shown above to the left (Rating). 21 Operation with tape Playing a tape You will only be able to load and eject video cassettes when your VCR is plugged into the mains. Your VCR may also playback recordings from NTSC tapes (on PAL TV). Getting a better picture When a cassette is inserted and playback started, the automatic tracking function works to get the best possible picture automatically. If the quality of the recording is poor, repeatedly press 3 or 4 on the remote control to manually adjust the tracking until any distortions have been removed. Press numbered 0 on the remote control to switch automatic tracking back on again. 5 Slow motion playback, Shuttle :press During playing back or still picture F or G. You can reach the following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) To switch off the slow motion and shuttle, press the desired function. During slow motion and shuttle, the noise bars may appear on the picture according to the status of tape. If distortions can be seen in the picture, reduce them with D or E. 9 6 Pressendtoofend playback. If the the tape is reached, playback automatically, rewind, stop, eject the tape. CM (Commercial Message) Skip: This feature enables you during playback of a tape to skip a commercial break in a few seconds, then resume normal playback. While tape is playing press on the remote control to skip commercial (or another programme material). Repeatedly press to skip: 1 Press 30 seconds 2 Press 60 seconds 3 Press 90 seconds 4 Press 120 seconds 5 Press 150 seconds 6 Press 180 seconds EPC (Easy Picture Control) This feature automatically improves playback picture quality by adjusting your VCR to the condition of the tape. 1 Make sure that you have correctly connected your VCR as described earlier in this book. [. . . ] Cancel the Rating function or change the rating level. Select "STEREO" by repeatedly pressing "AUDIO MONITOR" on the remote control. The TV is not set to receive DVD signal output. The video cable is not connected securely. No sound. The equipment connected with the audio cable is not set to receive DVD signal output. The audio cables are not connected securely. [. . . ]