User manual JVC HR-XV28SEK

[. . . ] DVD PLAYER & VIDEO CASSETTE RECORDER HR-XV28S PAL INSTRUCTIONS LPT1058-001A EN Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Notes on copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyright material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. This product incorporates copyright protection technology that is protected by method claims of certain U. S. [. . . ] Insert a video cassette with protection tab into your DVD+VCR. Press 2 or 1 to select the settings that you wish to revise. Press 3 or 4 to enter the correct information. PR DATE TIME PR-01 12 10 : 11 ~ 11 : 55 --- - : - - ~ - -: - --- - : - -~- - : - --- - : - -~- - : - --- - : - -~- - : - --- - : - -~- - : - --- - : - -~- - : - SP SP SP SP SP SP SP i 6. Press 3 or 4 to select the desired tape speed (SP, IP, or LP). IP mode determines how much tape is left and switches speed from SP to LP, if necessary, to complete recording the program. Check that the timer event details are correct. If you wish to record from AUDIO IN and VIDEO IN on the front or from either of the EURO SCART sockets on the back of VCR, press AUX to select for correct display (AV1, AV2 or AV3). PR DATE TIME PR-01 12 10 : 11 ~ 11 : 55 --- - : - - ~ - -: - --- - : - -~- - : - --- - : - -~- - : - --- - : - -~- - : - --- - : - -~- - : - --- - : - -~- - : - SP SP SP SP SP SP SP i PLUSCODE NO. Press the numbered buttons to enter the PLUSCODE NO. of the TV programme that you wish to record. If you make a mistake press 2 then enter the revised number. PLUSCODE NO. 246876543 DELETE : OK i REC 0~9, 4. If PLEASE CHECK is displayed it means that you have entered the wrong PLUSCODE number, entered the PLUSCODE number incorrectly. If "- -" is displayed, you have to enter the programme number of the station, you want to record from. PR DATE TIME PR-01 12 10 : 11 ~ 11 : 55 --- - : - - ~ - -: - --- - : - -~- - : - --- - : - -~- - : - --- - : - -~- - : - --- - : - -~- - : - --- - : - -~- - : - SP SP SP SP SP SP SP i 7. If you want to make another VIDEO Plus+ recording repeat stages 2 - 7. If PLEASE CHECK is displayed, you have entered incorrect information and will need to re-enter the data. Press Í/I to switch your DVD+VCR power off mode. will appear in the video recorder's display while your VCR waits to make the recording. To watch a DVD during timer recording standby mode, press Í/I and DVD to switch to DVD mode. Press Í/I to end recording. 22 Operation with tape Timer recording using On Screen Display You may set up to seven timer record events within one month of the current date. Note: 5. Use the 3 or 4 to enter the date of the programme. If you press ENTER/OK before entering the date you may select one of the following automated recording features. Press 2 or 1 to select, then press ENTER/OK to confirm. [. . . ] In the unlikely event of the plug fuse failing be sure to replace the fuse only with an identical approved type, as originally fitted, and to replace the fuse cover. If the fuse fails again consult your nearest JVC dealer. If nonetheless the mains plug is cut off remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. If this product is not supplied fitted with a mains plug then follow the instructions given below: DO NOT make any connection to the Larger Terminal coded E or Green. [. . . ]