User manual JVC HR-XVC19SUS-HR-XVC19 Instruction Manual

[. . . ] DVD PLAYER & VIDEO CASSETTE RECORDER HR-XVC18BUS HR-XVC19SUS INSTRUCTIONS LPT1086-001A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a bookcase or similar unit. REGULATORY INFORMATION: FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Note: MTS (Multi-Channel TV Sound) This DVD+VCR can decode MTS stereo and bilingual (SAP) off-the-air broadcast sound signals. It also decodes stereo TV sound from local cable companies as long as they operate on assigned cable frequencies and use the EIA-recommended MTS stereo/bilingual TV sound system. Multichannel TV Sound Indicator (MTS) When you press ENTER / OK one or both of the indicators appears on the TV Screen. STEREO The DVD+VCR can record in stereo onto the VHS Hi-Fi audio tracks when the BROADCAST TYPE option is in the STEREO position. The DVD+VCR can also record mono audio onto the mono audio track. SAP Some stations transmit a Second Audio Program, which is used for a second language or additional information. STEREO/SAP Use the BROADCAST TYPE option to select the desired recording mode (STEREO or SAP). VHS Hi-Fi Stereo / MTS Broadcast This DVD+VCR is equipped with the VHS Hi-Fi audio sound system for recording and playback. The information below gives a brief description of Hi-Fi audio and how to record and play a tape in the Hi-Fi audio mode. Hi-Fi Stereo Audio Sound A stereo TV with AUDIO/VIDEO input jacks or a stereo audio system is required for true stereo playback. To experience the full and rich stereo sound available with Hi-Fi recorded tapes, we recommend the connection of this unit to a home stereo audio system. Set the AUDIO MODE option to HI-FI on the VCR SETUP menu. 21 Operation If playing back a HI-FI tape produces noisy audio, manually change the menu setting from HI-FI to NORMAL. VCR Tape Recording Basic Instructions 1. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or if a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV's source selector to VIDEO. Insert a video cassette with the safety tab intact. Select the desired channel using CH -/+. If you are recording from another source via audio/video input jacks (at the rear or front panel), select LINE1 or LINE2 using AUX, CH + or CH -. Set the desired recording speed (SP or SLP) by pressing SPEED. This DVD+VCR is not designed to record in LP mode. Set the BROADCAST TYPE option to SAP if applicable. The REC indicator appears in the display window. If a cassette with no safety tab is loaded, the cassette is ejected. If the tape x reaches the end before STOP (x) is pressed, the DVD+VCR stops, rewinds and ejects the tape. Tip: Use PAUSE (X) for best results when making changes while recording. For example, if you want to change channels while recording, first press PAUSE (X) to put the unit in pause mode, select the desired channel on the DVD+VCR, and then press PAUSE (X) again to resume recording. To record one TV program while watching another 1. [. . . ] DVD+VCR was turned off while setting the Progressive scan mode. The Progressive Scan is set to On on the setup menu but is connected to a standard(analog) television with component video input. 36 Symptom The DVD+VCR does not start playback. Cause An unplayable disc is inserted. The disc is not placed within the guide. The disc is dirty. Correction Insert a playable disc. [. . . ]