User manual JVC HR-XVC33UC-HR-XVC33

[. . . ] DVD PLAYER & VIDEO CASSETTE RECORDER HR-XVC33U For Customer Use: INSTRUCTIONS Enter below the Model No. which are located on the rear of cabinet. Retain this information for future reference. Serial No. LPT0853-001B 2 EN Dear Customer, Thank you for purchasing the JVC DVD player & VHS video cassette recorder. [. . . ] Repeat Playback may not work properly depending on the type of disc being used. You cannot select A-B Repeat Playback by pressing REPEAT. Press REPEAT repeatedly to select the desired repeat mode, then press OK. Press PLAY SETUP twice. The on-screen bar appears on the TV screen. The following pop-up window appears under the selected item. , then press OK. EN 51 A-B Repeat Playback You can repeat the desired part. Time Search You can play back a disc from the desired point by specifying the elapsed time from the beginning of the current title (for DVD VIDEO) or the disc (for Audio CD/Video CD) using the Time Search. When a PBC-compatible Video CD is played back, be sure to inactivate PBC function before you perform Time search by pressing the number keys instead of the PLAY (4) button when you start playback. A Access the on-screen bar. B Select menu item. Press w e to move 0 to Press PLAY SETUP twice. The on-screen bar appears on the TV screen. The following pop-up window appears under the selected item. , then press OK. A Access the on-screen bar. B Select menu item. Press w e to move 0 to Press PLAY SETUP twice. The on-screen bar appears on the TV screen. C Select the repeat mode. E The following pop-up window appears under the selected item. , then press OK. Press rt repeatedly to select "A-B". Press OK at the beginning of the part you want to repeat (point A). The following display appears in the on-screen bar. C Select the time. TIME _ : _ _ : _ _ Press the number keys (0-9) to enter the time, then press OK. Example: To play back from a point 2 (hours): 34 (minutes): 08 (seconds) elapsed Select the end point Press 2 TIME _ : _ _ : _ _ 2 Press 3 TIME _ : _ _ : _ _ 2 34 Press 0 TIME _ : _ _ : _ _ 2 34 08 Press OK at the end of the part you want to repeat (point B). A-B Repeat Playback starts. The selected part of the disc (between point A and B) is played repeatedly. TIME _ : _ _ : _ _ 23 Press 4 To cancel A-B Repeat Playback Repeat from step A, select "OFF" in step C, then press OK. TIME _ : _ _ : _ _ 2 34 0 Press 8 You can also cancel Repeat Playback by pressing SKIP (2) or SKIP (6). If you have specified a wrong selection, Press w repeatedly until the wrong number is erased, then press number keys to enter the correct numbers. The unit starts playback from the specified time. To clear the on-screen bar Press PLAY SETUP. NOTES: To clear the on-screen bar Press PLAY SETUP. When "X" is displayed on the TV screen in step C, you have selected a point that excesses the recording time of the disc. Some DVD VIDEO discs do not contain time information, and it is no possible to use the Time Search function. In such a case, "X" is displayed on the TV screen as well. Time Search does not work while you play back the Video CD or SVCD with the PBC Function. A-B Repeat Playback may not work properly depending on the type of disc being used. The subtitles recorded around A-B point may not appear. The end of the item will be set as "B" point if the end of the item reached before you set the "B" point. When playing back a DVD, A-B Repeat Playback is possible only within the same title. "A-B" cannot be selected during Program and Random Playback. "A-B" cannot be selected while stopped. NOTES: Reactivate the Playback Control (PBC) Function You can reactivate the PBC function when you play back a PBCcompatible Video CD disc without PBC function. Press TOP MENU during playback. 52 EN OPERATIONS ON DVD DECK (cont. ) Chapter Search You can start playback the desired chapter using the on-screen bar. A Access the on-screen bar. B Select menu item. Press w e to move 0 to Press PLAY SETUP twice. The on-screen bar appears on the TV screen. The following pop-up window appears under the selected item. , then press OK. C Select the chapter. Press the number keys (0-10) to enter the desired chapter number, then press OK. The unit starts playback from the selected chapter. Examples: To select track 5, press the number key "5". To select track 15, press the number key "1" and "5". To select track 25, press number key "2" and "5". [. . . ] Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and above which are covered on an in-home basis. WHAT YOU MUST DO FOR WARRANTY SERVICE: Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized service center, please call toll free: (800) 537-5722. [. . . ]