User manual JVC HR-XVC38BUS-HR-XVC38 Instruction Manual

[. . . ] DVD PLAYER & VIDEO CASSETTE RECORDER HR-XVC38BU HR-XVC39SU For Customer Use: INSTRUCTIONS Enter below the Model No. which are located on the rear of cabinet. Retain this information for future reference. Serial No. LPT1128-001A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: Changes or modifications not approved by JVC could void user's authority to operate the equipment. [. . . ] The current code appears on the display window. Press x on the remote control to change the unit's code. The new code currently set on the remote control blinks on the display window for approximately 5 seconds, and is applied to the unit. 18 Operations - VCR This chapter describes how to operate the VCR and DVD. Manual Tracking To manually adjust the tracking use the CH (- / +) buttons during playback. Notes: · Vertical jitter requires a very fine adjustment. · Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more than 3 seconds. VCR Tape Playback Press the VCR button to select the device to be operated. Basic Instructions 1. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or if a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV's source selector to VIDEO. The indicator lights and the DVD+VCR powers on automatically. If the (TIMER) indicator in the display window is lit, press POWER (1/:) once. If a tape without a safety tab is inserted the unit starts playback automatically. If the tape reaches the end before you press STOP (x) the DVD+VCR automatically stops, rewinds and ejects the tape. Note: It is not necessary to select the tape speed for playback because it is automatically selected by the DVD+VCR. Also, during playback the TV/VCR selector switches to VCR mode automatically. Search This function lets you visually search for a tape section in either direction: forward and reverse. During the high-speed picture search modes, the audio is muted and horizontal lines (noise bars) appear. Also, a short time is needed to stabilize the tape speed when reentering the PLAY mode so slight interference may be observed during this time. Press REW (m) or FF (M) during playback. Note: After 3 minutes in SEARCH mode the DVD+VCR returns to PLAY mode to protect the tape and video heads. Still Picture and Frame-by-Frame Playback 1. A still picture appears on the TV screen and the audio is muted. If the still picture vibrates vertically, stabilize it by using CH (- / +) on the remote control. Press PAUSE (X) repeatedly to advance the video picture one frame at a time. Note: After 5 minutes in STILL mode the DVD+VCR stops to protect the tape and video heads. Auto Tracking Automatic tracking adjusts the picture to remove snow or streaks and beings when: · A tape is played for the first time. · The tape speed (SP, LP, SLP) changes. · Streaks or snow appear due to scratches on the tape. 19 Operation Slow Motion 1. [. . . ] · The disc is placed upside down. · The disc is not placed within the guide. · The disc is dirty. Correction · Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit. ) · Insert a playable disc. [. . . ]