User manual JVC HV-Z29V1

[. . . ] COLOUR TELEVISION Contents Setting up your TV. 43 HV-Z34L1 HV-Z29V1 INSTRUCTIONS LCT1460-001A-H 1103-CR-JMT © 2003 VICTOR COMPANY OF JAPAN, LIMITED Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV. [. . . ] However, if the picture is not clear or no colour appears, choose the colour system manually. Then press the a or 3 button The sub-menu of the COLOUR SYSTEM function appears. >> COLOUR SYSTEM MAIN PAL SUB AUTO PAL Asia, Middle East PAL PAL SECAM NTSC SECAM PAL PAL PAL PAL PAL PAL SECAM OK D0016-EN 2 Press the 5 buttons to choose MAIN or SUB MAIN: You can change the colour system of the main-picture. SUB: You can change the colour system of the sub-picture. · Choose MAIN when a sub-picture is not displayed. 3 Press the 6 buttons to choose the appropriate colour system. Then press the a button PAL: PAL system Europe Oceania Africa 23 Using the TV's menu ZOOM You can change the screen size according to the picture aspect ratio. Choose the optimum one from three ZOOM modes. 1 Choose ZOOM, then press the OK or 3 button. >> ZOOM REGULAR ZOOM 16:9 SOUND menu SOUND STEREO/ SOUND MODE BALANCE HEADPHONE VOLUME CINEMA SURROUND SUPER BASS BBE DIGITAL OSD-3-EN MONO MONO LOW ON OK D0017-EN 2 Press the 6 buttons to choose a ZOOM mode. · You can choose a ZOOM mode from REGULAR, ZOOM or 16:9 modes. For details, see "ZOOM button" on page 9. · Functions in the "SOUND" menu other than "HEADPHONE VOLUME" work for the TV speakers. They do not work for the sound from the headphones. · When the headphones are connected and only one screen is displayed, "STEREO/I·II" and "HEADPHONE VOLUME" can be used. STEREO / I·II When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (sub I) or Bilingual II (sub II). When the stereo broadcasting is received poorly, you can change from stereo to mono sound so that you can hear the broadcast more clearly and easily. s : Stereo sound v : mono sound t : Bilingual I (sub I) u : Bilingual II (sub II) MONO: Cancels the Multi Sound function, and the sound becomes monaural. · The sound mode you can choose differs depending on the TV programme. · This function does not work in the VIDEO modes. MULTI Choosing the number of pictures for the Multi-picture function. 1 Choose MULTI, then press the OK or 3 button. >> MULTI OSD-2-EN 2 Press the 5 buttons to choose the number of pictures. Then press the OK button. 24 Using the TV's menu SOUND MODE Register your preferred pattern in the SOUND MODE USER. 1 Choose SOUND MODE, then press the OK or 3 button. The "SOUND MODE" menu appears. > SOUND MODE NEWS HEADPHONE VOLUME Adjust the volume of the sub-picture sound which is heard through the headphones when set to Twin mode, PIP mode or 5 pictures multi. 2 :Reduce volume 3 :Increase volume · When not set to Twin mode or PIP mode, the headphone volume is adjusted with the r q (volume) buttons. CINEMA SURROUND 120Hz 500Hz 1. 5kHz 5kHz 10kHz SOUND MODE OK OSD4-EN 2 Press the red button and choose your preferred SOUND MODE. 3 Press the 5 buttons and choose the frequency to adjust, then press the 6 buttons and adjust the frequency. [. . . ] If the TV is turned off suddenly, try to press the # button to turn on the TV once again. At this time, if the TV resumes a normal state, there is no problem. · If you bring a magnetized device such as a speaker near to your TV, a picture may be warped or unnatural colours appear at the corners of the screen. In this case, keep the device apart from your TV. [. . . ]