User manual JVC KD-AR5500

[. . . ] CD/SD RECEIVER KD-AR5500/KD-LHX550 RECEPTOR CON CD/SD KD-AR5500/KD-LHX550 RECEPTEUR CD/SD KD-AR5500/KD-LHX550 For canceling the display demonstration, see page 8. Para cancelar la demostración en pantalla, consulte la página 8. Pour annuler la démonstration des affichages, référez-vous à la page 8. For installation and connections, refer to the separate manual. [. . . ] · Do not insert 8 cm (3-3/16") discs (single CD) and unusual shape discs (heart, flower, etc. ) into the loading slot. Tuner operations Storing stations in memory · During SSM search. . . ­ All previously stored stations are erased and stations are stored newly. ­ Received stations are preset in No. ­ When SSM is over, the station stored in No. · When storing a station manually, a previously preset station is erased when a new station is stored in the same preset number. Playing a disc/SD card · While playing an audio CD: If a title has been assigned to the audio CD (see page 32), it will be shown on the display. · While fast-forwarding or reversing an MP3 or WMA track, you can only hear intermittent sounds. To be continued. . . . 41 ENGLISH Basic operations Disc/SD card operations · While playing an SD card, the playback order may differ from other SD players. · This receiver may be unable to play back some SD cards due to their characteristics or recording conditions. · This receiver cannot play back mini SD card and MMC. · If the inserted SD card does not have the correct files, "SD" is skipped. ENGLISH Playing an MP3/WMA track · This receiver can play back MP3/WMA files with the extension code <. mp3> or <. wma> (regardless of the letter case--upper/lower). · This receiver can show the names of albums, artists (performer), and ID3 Tag (Version 1. 0, 1. 1, 2. 2, 2. 3, or 2. 4) for MP3 files and for WMA files. · This receiver can display only one-byte characters. No other characters can be correctly displayed (see page 44). · This receiver can play back MP3/WMA files meeting the conditions below: ­ Bit rate: 8 kbps -- 320 kbps ­ Sampling frequency: 48 kHz, 44. 1 kHz, 32 kHz (for MPEG-1) 24 kHz, 22. 05 kHz, 16 kHz (for MPEG-2) 48 kHz, 44. 1 kHz, 32 kHz (for WMA) ­ Disc format: ISO 9660 Level 1/ Level 2, Romeo, Joliet, Windows long file name · For MP3/WMA discs: The maximum number of characters for file/ folder names vary among the disc format used (includes 4 extension characters--<. mp3> or <. wma>). ­ ISO 9660 Level 1: up to 12 characters ­ ISO 9660 Level 2: up to 31 characters ­ Romeo*: up to 128 (72) characters ­ Joliet*: up to 64 (36) characters ­ Windows long file name*: up to 128 (72) characters * The parenthetic figure is the maximum number of characters for file/folder names in case the total number of files and folders is 313 or more. · For SD cards: The maximum number of characters for folder name is 8 characters; file name is 12 characters. The receiver cannot recognize folder with period (. ) on the folder name. · This receiver can recognize the total of 512 files, of 200 folders, and of 8 hierarchies of an MP3/WMA disc; 255 files and 63 folders of an SD card. Playing a CD-R or CD-RW · Use only "finalized" CD-Rs or CD-RWs. · This receiver can play back only the files of the same type which is first detected if a disc includes both audio CD (CD-DA) files and MP3/WMA files. · This receiver can play back multi-session discs; however, unclosed sessions will be skipped while playing. · Some CD-Rs or CD-RWs may not play back on this receiver because of their disc characteristics, and for the following causes: ­ Discs are dirty or scratched. ­ Moisture condensation occurs on the lens inside the receiver. [. . . ] · Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this receiver. · For amplifier only: ­ Disconnect the speakers from this receiver, connect them to the amplifier. Leave the speaker leads of this receiver unused. ­ You can switch off the built-in amplifier and send the audio signals only to the external amplifier(s) to get clear sounds and to prevent internal heat built-up inside the receiver. [. . . ]