User manual JVC KD-AV7001 INSTALLATION

[. . . ] In addition, mount in an area that will not prevent the unit from dissipating heat. Do not mount the unit in the places which are subject to heat such as near a radiator, in a glove compartment or in insulated area such as under a car mat that will prevent the unit from dissipating heat. [. . . ] When using the optional stay / Beim Verwenden der Anker-Option / Utilisation de l'entretoise en option / Wanneer u de steun gebruikt (facultatief) Fire wall When installing the unit without using the sleeve / Beim Einbau des Geräts ohne Halterung / Installation de l'appareil sans utiliser de manchon / Wanneer u het apparaat zonder huis installeert In a Toyota for example, first remove the car radio and install the unit in its place. Install the unit at an angle of less than 30°, taking it into account that the monitor would eject when in use (see below). : When installing the unit on the mounting bracket, make sure to use screws of proper length refering to the table above. If longer screws are used, they could damage the unit. Installing the hideaway unit (under the front seat) Connect the main unit and the hideaway unit using AV bus cable (supplied). Be sure to use the tapping screws (not supplied) of appropriate length so that they will not damage any parts of the car. Electrical connections / Elektrische Verbindungen / Connexions électriques / Elektrische verbindingen If your car is equipped with the ISO connector For some VW/Audi or Opel (Vauxhall) automobile Wenn Ihr Auto mit ISO-Steckern ausgestattet ist Für manche VW/Audi oder Opel (Vauxhall) Fahrzeuge From the car body Si votre voiture est équippée d'un connecteur ISO Pour certaine voiture VW/Audi ou Opel (Vauxhall) Von der Karosserie A B Indien uw auto is uitgerust met de ISO-connector De la carrosserie de la Voor bepaalde modellen VW/Audi of Opel (Vauxhall) CD · View from the lead side Ansicht von der Leitungsseite Vue à partir du côté des fils Aanzicht vanaf het snoer You may need to modify the wiring of the supplied power cord (for the main unit) as illustrated. Contact your authorized car dealer before installing this unit. Blue with white stripe Blau mit weißem Streifen Bleu avec bande blanche Blauw met witte streep Blue with white stripe Blau mit weißem Streifen Bleu avec bande blanche Blauw met witte streep Use modified wiring 2 if the unit does not turn on. *1 *2 Before checking the *2 operation of this unit prior to installation, this lead must be connected, otherwise power cannot be turned on. C Connecting the back camera lead / Anschließen der Rückfahrkameraleitung / Connexion du fil de la caméra de recul / Aansluiten van het snoer voor de achteruitkijkcamera Locate the back lamp lead in the trunk. Back lamp lead Rückfahrleuchtenleitung Fil des feux de recul Achterlichtdraad Suchen Sie die Rückfahrleuchtenleitung im Kofferraum. Back lamp lead Rückfahrleuchtenleitung Fil des feux de recul Achterlichtdraad If your car is equipped with the steering wheel remote controller, you can operate this unit using the controller. To do it, a JVC's OE remote adapter (not supplied) which matches with your car is required. [. . . ] *5 Firmly attach the ground wire to the metallic body or to the chassis of the car--to the place uncoated with paint (if coated with paint, remove the paint before attaching the wire). Remote lead Fernbedienungsleitung Fil de commande à distance Afstandbedieningsdraad If you connect the remote lead (blue with white stripe) to the remote lead of the other equipment, they can be turned on and off automatically for this unit. [. . . ]