User manual JVC KD-AVX20

[. . . ] English: Hereby, JVC, declares that this KD-AVX40 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and/or invisible class 1M laser radiation when open. [. . . ] While receiving a DAB service: When driving in an area where a service cannot be received, this unit automatically tunes in to another ensemble or FM Radio Data System station broadcasting the same programme. While receiving an FM Radio Data System station: When driving in an area where a DAB service is broadcasting the same programme as the FM Radio Data System station, this unit automatically tunes in to the DAB service. When shipped from the factory, Alternative Frequency Reception is activated. Listening to other external components When you connect a Navigation System to the unit, you can view the navigation screen regardless of the source. preparation: Make sure <Navigation> is selected for <AV Input>. ( page 56) To watch the navigation screen, touch DISP repeatedly. When you do not connect the Navigation System but connect an audio component to LINE IN plugs, you can use "AV Input" for listening to the audio source. You can connect an external component to the CD changer jack on the rear using the Line Input Adapter--KS-U57 (not supplied) or AUX Input Adapter--KS-U58 (not supplied). You can store your adjustments into <User1>, <User2>, and <User3>. You can select one of the following sound modes: <Flat>, <Hard Rock>, <R&B>, <Pop>, <Jazz>, <Dance>, <Country>, <Reggae>, <Classic>, <User1>, <User2>, or <User3> · 1 Select a character, then move the entering position. To change the character set, touch DISP. 2 Repeat step 1 until you finish entering the title. The display indications may change according to change of the specifications. You can select the background picture of the monitor. Holding DISP (on the unit) scrolls the information regardless of this setting. ( "Installation/Connection Manual") Adjustable only when the source is a disc or USB containing pictures or movies, or "AV Input. " Not adjustable for audio sources. After you change the indication language setting, turn off then on the power so that your setting takes effect. ­15 (darkest) to +15 (brightest); Initial 00 You can adjust the following to make the monitor clear and legible for watching the playback picture. the setting will be stored for "Disc/USB" and "AV Input. " ­15 to +15; Initial 0 Bright: Adjust if the picture is too bright or too dark. Tint: Adjust the tint if the human skin color is unnatural (available only when the source is "AV Input" and the incoming signal is NTSC). [. . . ] The sound is interrupted or skipped while · Reduce the distance between the unit and the Bluetooth using a Bluetooth audio player. (When the sound is not yet restored, ) connect the device again. The connected audio player cannot be Check whether the connected audio player supports AVRCP controlled. The unit does not response when you tried to You may have tried to copy the same entries (as stored) to copy the phone book to the unit. [. . . ]