User manual JVC KD-DV5101

[. . . ] Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. How to reset your unit If a disc cannot be recognized by the receiver or cannot be ejected, ejects the disc as follows. [. . . ] 4:3 [MULTI]* PAN SCAN : Select this when the aspect ratio of your monitor is 4:3. While viewing a wide screen picture, the black bars do not appear; however, the left and right edges of the pictures will not be shown on the screen. PCM ONLY : Select this when connecting an amplifier or a decoder incompatible with Dolby Digital, DTS, MPEG Audio, or connecting to a recording device. DOLBY DIGITAL/PCM : Select this when connecting an amplifier or a decoder compatible with Dolby Digital. STREAM/PCM : Select this when connecting an amplifier or a decoder compatible with Dolby Digital, DTS, and MPEG Audio. When playing back a multi-channel DVD disc, this setting affects the signals reproduced through the LINE OUT jacks (and through the DIGITAL OUT terminal when "PCM ONLY" is selected for "DIGITAL AUDIO OUTPUT"). DOLBY SURROUND : Select this when you want to enjoy multichannel surround audio by connecting an amplifier compatible with Dolby Surround to this receiver. You can enjoy a powerful sound at low or middle volume levels while playing a Dolby Digital software. ON : Select this to always use this function. In this section, you can learn how to use the buttons on the control panel in order to operate the DVD/CD player. * The search speed changes to x2 ] x10 for all discs (DVD, VCD, CD), but the information shown on the monitor is only for DVD/VCD. The number buttons can also use to select item on the PBC menu. To use folder search on MP3/WMA discs, it is required that folders are assigned with 2-digit number at the beginning of their folder names--01, 02, 03, and so on. To select a particular track in a folder (for MP3/WMA disc) after selecting a folder: To the beginning of the current track, then the previous tracks. You can lock a disc in the loading slot. First time you press 5 or button, the chapter/track skips to the nearest higher or lower chapter/track with a number of multiple ten (ex. Then each time you press the button, you can skip 10 chapters/tracks. After the last chapter/track, the first chapter/track will be selected and vice versa. Each time you press the button consecutively, the next or previous chapters/ tracks is located and played back. In this case, the TAG indicator will not light up. You can use only one of the following playback modes at a time. : All tracks of the current folder, then tracks of the next folder and so on. [. . . ] Finalize the CD-R/CD-RW or DVD-R/DVD-RW with the component which you used for recording. Stop playback while driving on rough roads. CD-R/CD-RW or DVD-R/ CD-R/CD-RW or DVD-R/ DVD-RW cannot be played DVD-RW is not finalized. Sound and picture are sometimes interrupted or distorted. [. . . ]