User manual JVC KD-G311EX/EU

[. . . ] 7. INSTRUCTIONS GET0254-001A [EE] CCK ENGLISH ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. [. . . ] To restore the stereo effect, repeat the same procedure. "MONO OFF" appears and the MO indicator goes off. To tune in to a station manually In step Y above. . . 1 8 Storing stations in memory You can preset six stations for each band. FM station automatic presetting-- SSM (Strong-station Sequential Memory) 1 Select the FM band (FM1 ­ FM3) you want to store into. 3 2 Preset number flashes for a while. 3 1 Listening to a preset station 2 Select the preset station (1 ­ 6) you "SSM" flashes, then disappears when automatic presetting is over. Local FM stations with the strongest signals are searched and stored automatically in the FM band. want. Manual presetting Ex. : Storing FM station of 92. 5 MHz into the preset number 4 of the FM1 band. To check the current clock time while listening to an FM or AM station 1 ENGLISH 9 2 Disc operations ENGLISH Playing a disc All tracks will be played repeatedly until you change the source or eject the disc. To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous tracks Total playing time of Total track number the inserted disc of the inserted disc To the following tracks. To the beginning of the current track, then the previous tracks. Elapsed playing time Current track number To go to a particular track directly To select a number from 01 ­ 06: To stop play and eject the disc To select a number from 07 ­ 12: 10 You can lock a disc in the loading slot. To cancel the prohibition, repeat the same procedure. Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Mode TRK RPT: RPT OFF: Plays repeatedly The current track. Cancels. Ex. : When "TRK RPT" is selected Random play Mode DISC RND: RND OFF: Plays at random All tracks of the current disc. Cancels. Ex. : When "DISC RND" is selected ENGLISH 11 Prohibiting disc ejection To check the current clock time while listening to a disc Sound adjustments ENGLISH Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. Indication USER ROCK CLASSIC POPS HIP HOP JAZZ For: (Flat sound) Rock or disco music Classical music Light music Funk or rap music Jazz music Preset values BAS*1 TRE*2 LOUD*3 00 +03 +01 +04 +02 +02 00 +01 ­02 +01 00 +03 OFF ON OFF OFF ON OFF ~ Ex. : When "ROCK" is selected Indication pattern for each sound mode: *1 BAS: Bass *2 TRE: Treble *3 LOUD: Loudness 12 Adjusting the sound You can adjust the sound characteristics to your preference. Indication BAS*1 (bass) TRE*1 (treble) FAD*2 (fader) To do: Adjust the bass. Range ­06 (min. ) to +06 (max. ) ­06 (min. ) to +06 (max. ) R06 (Rear only) to F06 (Front only) L06 (Left only) to R06 (Right only) LOUD ON J LOUD OFF 1 Adjust the treble. Adjust the front and rear speaker balance. Ex. : When "TRE" is selected BAL (balance) 2 LOUD*1 (loudness) Indication pattern changes as you adjust the level. Adjust the left and right speaker balance. Boost low and high frequencies to produce a wellbalanced sound at low volume level. VOL*3 (volume) Adjust the volume. 00 (min. ) to 30 or 50 (max. )*4 *1 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including "USER. " *2 If you are using a two-speaker system, set the fader level to "00. " *3 Normally the +/­ buttons work as the volume control. So you do not have to select "VOL" to adjust the volume level. *4 Depending on the amplifier gain control setting. (See page 14 for details. ) ENGLISH 13 General settings -- PSM ENGLISH Basic procedure You can change PSM (Preferred Setting Mode) items listed on the table that follows. 3 Adjust the PSM item selected. 1 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 2 Select a PSM item. 5 Finish the procedure. Ex. : When you select "AMP GAIN" Indications DEMO Display demonstration Selectable settings, [reference page] DEMO ON: [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7]. · SSM automatic presetting does not work. · Static noise while listening to the radio. · CD-R/CD-RW cannot be played back. · Tracks on the CD-R/ CD-RW cannot be skipped. · Disc can be neither played back nor ejected. The built-in microcomputer may have functioned incorrectly due to noise, etc. CD-R/CD-RW is not finalized. FM/AM Disc is locked. The CD player may have functioned incorrectly. Disc playback · Disc sound is sometimes interrupted. You are driving on rough roads. Connections are incorrect. · "NO DISC" appears on the No disc is in the loading display. Disc is inserted incorrectly. 18 Specifications Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 , 40 Hz to 20 000 Hz at no more than 0. 8% total harmonic distortion. Rear: 19 W per channel into 4 , 40 Hz to 20 000 Hz at no more than 0. 8% total harmonic distortion. Load Impedance: 4 (4 to 8 allowance) Tone Control Range: Bass: ±10 dB at 100 Hz Treble: ±10 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz Signal-to-Noise Ratio: 70 dB Line-Out Level/Impedance: 2. 0 V/20 k load (full scale) Output Impedance: 1 k Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 96 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit GENERAL Power Requirement: Operating Voltage: DC 14. 4 V (11 V to 16 V allowance) Grounding System: Negative ground Allowable Operating Temperature: 0°C to +40°C Dimensions (W × H × D): Installation Size (approx. ): 182 mm × 52 mm × 150 mm Panel Size (approx. ): 188 mm × 58 mm × 11 mm Mass (approx. ): 1. 3 kg (excluding accessories) TUNER SECTION Frequency Range: FM1/FM2: 87. 5 MHz to 108. 0 MHz FM3: 65. 00 MHz to 74. 00 MHz AM: (MW) 522 kHz to 1 620 kHz (LW) 144 kHz to 279 kHz [FM Tuner] Usable Sensitivity: 11. 3 dBf (1. 0 µV/75 ) 50 dB Quieting Sensitivity: 16. 3 dBf (1. 8 µV/75 ) Alternate Channel Selectivity (400 kHz): 65 dB Frequency Response: 40 Hz to 15 000 Hz Stereo Separation: 30 dB Capture Ratio: 1. 5 dB [MW Tuner] Sensitivity: 20 µV Selectivity: 35 dB [LW Tuner] Sensitivity: 50 µV Design and specifications are subject to change without notice. ENGLISH 19 AUDIO AMPLIFIER SECTION CD PLAYER SECTION JVC. [. . . ] : FM1 FM2: 87, 5 108, 0 FM3: 65, 00 74, 00 . Y . . . "MONO OFF", MO . 8 6 . 2 FM---SSM (Strong-station Sequential Memory-- ) 1 FM (FM1 ­ FM3) . 3 2 . 3 1 "SSM", . FM FM. 2 (1 ­ 6). : FM- 92, 5 4 FM1. FM AM 1 9 CCK CCK , . . . / . , . 01 ­ 06: 07 ­ 12: 10 . . . 1 2 . TRK RPT: RPT OFF: . [. . . ]