User manual JVC KD-HDR44

[. . . ] (e) ADVARSEL: Usynlig laserstråling ved åbning, når sikkerhedsafbrydere erude af funktion. Undgåudsættelse for stråling. (d) VARNING:Osynlig laserstrålning när denna del är öppnadoch spärren är urkopplad. (s) VARO: Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. [. . . ] Each time you press the button consecutively, the beginning of the next track is located and played back. Press 4 briefly, while playing a CD, to go back to the beginning of the current track. Each time you press the button consecutively, the beginning of the previous track is located and played back. SSM To go to a particular track directly 7 8 9 10 11 12 1 2 3 4 5 6 Press the number button corresponding to the track number to start its playback. · To select a track number from 1 ­ 6: Press 1 (7) ­ 6 (12) briefly. · To select a track number from 7 ­ 12: Press and hold 1 (7) ­ 6 (12) for more than 1 second. 20 MO/RPT RND To play back tracks at random (Random Play) You can play back all tracks on the CD at random. RND Each time you press RND (Random) while playing a CD, CD random play mode turns on and off alternately. When the random mode is turned on, the RND indicator lights up on the display and a track randomly selected starts playing. · To select the next track at random, press ¢ briefly. To play back tracks repeatedly (Repeat Play) You can play back the current track repeatedly. MO RPT Each time you press MO/RPT (Mono/Repeat) while playing a CD, CD repeat play mode turns on and off alternately. When the repeat mode is turned on, the RPT indicator lights up on the display. Track number of the currently playing track 21 ENGLISH Selecting CD playback modes ENGLISH Prohibiting CD ejection MD/CD You can prohibit the CD ejection and can "lock" a CD in the loading slot. While pressing MD/CD, press for more than 2 seconds. "NO EJECT" flashes on the display for about 5 seconds, and the CD is "locked" and cannot be ejected. To cancel the prohibition and "unlock" the CD, press again for more than 2 seconds, while pressing MD/CD. "EJECT OK" appears on the display, and the CD is "unlocked. " 22 MD OPERATIONS 1 ENGLISH Playing an MD 1 2 Label side Open the control panel. If there is already a CD or an MD inside the unit, it ejects automatically. 1. Insert an MD into the loading slot. The unit turns on, draws the MD and starts playback automatically. Insert an MD in the same way as indicated on the MD Title of the track 2. Adjust the front and rear speaker balance. TREBLE LOUDNESS FADER BALANCE Range ­06 (min. ) -- +06 (max. ) ­06 (min. ) -- +06 (max. ) R06 (rear only) -- F06 (front only) L06 (left only) -- R06 (right only) BALANCE Adjust the left and right speaker balance. LOUDNESS Boost low and high frequencies to produce a well-balanced sound at low ON -- OFF volume level. 00 (min. ) -- 50 (max. ) Note: * If you are using a two-speaker system, set the fader level to "00" (center). 2 Adjust the level. Note: Normally the control dial is used to set the volume. So you do not have to select "VOLUME" to adjust the volume level. 28 You can adjust the sound control modes (BEAT, SOFT, POP: see page 27) to your preference and store your own adjustments in memory. 2 3 1, 4 1 SOUND Call up the sound control mode you want to adjust. See page 27 for details. 2 SEL Select "BASS, " "TREBLE" or "LOUDNESS. " Within 5 seconds 3 Adjust the bass or treble level or turn the loudness function ON/OFF. See page 28 for details. 4 SOUND Press and hold SOUND until the sound control mode you selected flashes on the display. Your setting is stored in memory. 5 Repeat the same procedure to store other settings. To reset to the factory settings Repeat the same procedure and reassign the preset values listed in the table on page 27. 29 ENGLISH Storing your own sound adjustments OTHER MAIN FUNCTIONS ENGLISH Setting the clock 1 3, 5 2, 4 6 1 SEL Press and hold the button for more than 2 seconds so that "PSM" appears on the lower part of the display. 2 3 1 2 Set the hour. 1 Select "CLOCK HOUR" if not shown on the display. 2 Adjust the hour. SSM 4 1 SSM 5 2 Set the minute. 1 Select "CLOCK MINUTE. " 2 Adjust the minute. 6 DISP Start the clock. To check the current clock time while the unit is turned off, press DISP. The power turns on, the clock time is shown for 5 seconds, then the power turns off. · If the ignition of your car is turned off or set to the accessory-off (ACC OFF) position, you cannot use this function. 30 You can change the items listed on the next page by using the PSM (Preferred Setting Mode) control. Basic Procedure 1 3 2 1 SEL Press and hold the button for more than 2 seconds so that "PSM" appears on the lower part of the display. 2 SSM Select the PSM item you want to adjust (see page 32). 3 Select or adjust the PSM item selected above. 31 ENGLISH Changing the general settings (PSM) ENGLISH 1 SEL 2 Select. SSM 3 Set. Back Back 12HOUR Advance Factorypreset settings 0:00 See page CLOCK HOUR CLOCK MINUTE CLOCK24H/12H Hour adjustment Minute adjustment 24/12-hour time display Automatic setting of the clock Display mode PTY standby PTY search Traffic announcement volume Level display 30 Advance 24HOUR ON PS NAME 24HOUR ON PS NAME NEWS (See page 13. ) VOL (20) 33 17 16 12 13 16 AUTO ADJUST OFF FREQUENCY DISPLAY MODE PTY STANDBY PTY SEARCH TA VOLUME 29 programme types (See page 18. ) VOL (00 ­ 50) NORMAL OFF PEAK LEVEL METER NORMAL 33 DIMMER MODE Dimmer AUTO ON OFF AUTO 33 CRUISE MODE Audio cruise 1 OFF 2 OFF 800 rpm 05 OFF MUTING 2 34 35 34 36 36 36 37 37 +OR- RPM SET BOOST TELEPHONE Idling speed* Boost* Audio mute for cellular phone system Key-touch tone Power amplifier switch Display contrast Name display OFF -- 01 ­ 15 MUTING 1 BEEP SWITCH P. AMP SWITCH CONTRAST SCROLL MODE OFF OFF 1 ­10 ONCE OFF ON ON ON ON 5 AUTO ONCE * When you select "1" or "2" for Audio Cruise Mode, you can adjust these items. [. . . ] · Static noise while listening to the radio. · "NO DISC" appears on the display. Signals are too weak. The antenna is not connected firmly. No CD is in the loading slot (or in the magazine). [. . . ]