User manual JVC KD-NX10

[. . . ] We would like to thank you for purchasing one of our JVC products. Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual for future reference. Use of the navigation unit is only permitted if the traffic conditions are suitable and you are absolutely sure that no risk, obstruction or inconvenience will be incurred to you, your passengers or other road users. the requirements of the Road Traffic Regulations apply at all times. [. . . ] If you select NO PTY in FM-DAS mode, all stations will once again be displayed. The individual programmes can be selected using the right-hand rotary control . By pressing the right rotary control , you can choose between Play (programme unfiltered) and Skip (programme filtered out). To turn the filter function on or off, press the multifunction button repeatedly to turn the filter function on (Fil on) or off (No Fil ). Turning PTY display on / off Storing: In each case up to 12 stations can be stored using the station buttons. With multifunction button , select either PTY (PTY Display On) or Frequency (PTY Display Off). In the Radio Menu Mode, select level Stations RDS or Stations FIX using multifunction button . Calling up a preset: Press multifunction button or and the stored station will be called up. Calling up stations: Press multifunction button or and the stored station will be called up. Using the multifunction button select the level Stations FIX. The 12 stations with the best reception are stored under the station buttons in order of quality. To exit the Autostore memory level, turn off the Autostore memory (Autostore off) with multifunction button . Next, turn the right-hand rotary control . If the right rotary control is not turned after a short time, MAN will disappear from the display and manual tuning is turned off. Next, turn the right-hand rotary control . If the right rotary control is not turned after a short time, MAN will disappear from the display and manual tuning is turned off. As a result, the RDS diversity function can lead to the radio switching between various regional programmes which may vary in terms of broadcasting content. In such a case, the special regional programming must be selected directly. If several regional programmes are transmitted by one station, this can only be seen when the station is selected. Stations with additional regional transmitters are indicated with a star (i. Note: If the signal quality of a regional alternative drifts despite the RDS Diversity function, it may mean that regional alternatives are only transmitted on a few frequencies. Therefore, there are fewer frequencies with strong signals available for the unit to switch to. [. . . ] Once the previously entered data has been confirmed, the tyre data can be entered or self-calibration can be started. To enter the tyre data, select INPUT TYRE VALUES by turning the right rotary control and press to confirm. Enter the correct tyre size using the right rotary control and confirm the entry by pressing for more than 2 seconds. The letter "R" cannot be entered. [. . . ]