User manual JVC KD-R35

[. . . ] Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and/or invisible class 1M laser radiation when open. [. . . ] Some characters or symbols will not be shown correctly (or will be blanked) on the display. ) : Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. : Boost low and high frequencies to produce a well-balanced sound at a low volume level. : Adjust the auxiliary input level to avoid the sudden increase of the output level when changing the source to external component connected to the AUX input jack on the control panel. " *8 If you are using a two-speaker system, set the fader level to "00. VOL ADJ ­05 -- : Preset the volume adjustment level of VOL ADJ +05 each source (except FM), compared to the [ VOL ADJ 00 ] FM volume level. The volume level will automatically increase or decrease when you change the source. ⷠBefore making an adjustment, select the source you want to adjust. LOW : Frequencies lower than 72 Hz are sent to the subwoofer. ⷠMID : Frequencies lower than 111 Hz are sent to the subwoofer. ⷠHIGH : Frequencies lower than 157 Hz are sent to the subwoofer. : Select either one which mutes the sounds · LOW POWER : VOLUME 00 ­ VOLUME 30 (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers. *13 The volume level automatically changes to "VOLUME 30" if you change to <LOW POWER> with the volume level is set higher than "VOLUME 30. " *14 Displayed only when any source other than "AM" is selected. *15 Displayed only when any source other than "AUX IN" is selected. More about this unit If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power. ⷠIf no operation is done for about 60 seconds after pressing MENU button, the operation will be canceled. The Non-DVD side of a "DualDisc" does not comply with the "Compact Disc Digital Audio" standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended. If you change the source while listening to a disc, playback stops. Next time you select "CD" as the playback source, playback will start from where it had been stopped previously. ⷠWhen a disc is inserted upside down, "PLEASE" and "EJECT" appear alternately on the display. [. . . ] The elapsed playing time is not correct. The correct characters are not displayed (e. Skip to the next track encoded in an appropriate format or to the next non-copy-protected WMA track. This is caused by how the tracks are recorded on the disc. [. . . ]