User manual JVC KD-R431

[. . . ] ENGLISH FRANÇAIS KD-R531/KD-R432/KD-R431 CD RECEIVER / RÉCEPTEUR CD For canceling the display demonstration, see page 4. / Pour annuler la démonstration des affichages , référez-vous à la page 4. For installation and connections, refer to the separate manual. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. [. . . ] pro Equalizer 1 (Hold) <PRO EQ> <BASS>**/<MIDDLE>/ <TREBLE> 2 - - - - - - - - or - - - - - - - Press repeatedly. DYNAMIC VOCAL BOOST BASS BOOST USER FLAT NATURAL (back to the beginning) 3 Adjust the sound elements of the selected tone. 5 kHz LVL -06 to +06 [+05] [Q FIX] Storing your own adjustments Easy Equalizer While listening, you can adjust the subwoofer level and tone level of the selected sound mode. The adjustments are stored and <USER> is activated. The adjustments are stored and <USER> is activated. to exit from the menu , press DISP or MENU. If no operation is done for about 60 seconds, the operation will be canceled. 2 Menu item DEMO CLOCK SET 24H/12H CLOCK ADJ *1 (Clock adjustment) DIMMER SET For settings , Selectable setting (Initial: [XX]) page 4. CLOCK BRIGHTNESS *3 DISPLAY SCROLL *4 TAG DISPLAY PRO EQ *1 *2 [AUTO]: The built-in clock is synchronized with the clock data received from the FM Radio Data System station. Selects the display and button illumination adjusted in the <BRIGHTNESS> setting. [AUTO]: Changes between the Day and Night adjustments when you turn off/on the car headlights. DAY/NIGHT: Brightness settings for the display and button illumination for day and night. [ON]: Shows the TAG information while playing MP3/WMA tracks. The illumination control lead connection is required. (See “Installation/Connection Manual”. ) This setting may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this case, change the setting to other than <DIMMER AUTO>. Initial: DAY (BUTTON ZONE [25], DISP ZONE [31])/NIGHT (BUTTON ZONE [9], DISP ZONE [12]) Some characters or symbols will not be shown correctly (or will be blanked) on the display. ON: Boosts low and high frequencies to produce a well-balanced sound at a low volume level. ) WIDE: Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. (Displayed only when the source is “USB-IPOD”. [BT ADAPTER]: Select if the rear auxiliary input jack is connected to the Bluetooth adapter, KS-BTA100 ( page 10). [. . . ] * Remedy/Cause Check the cords , aerial and cable connections. Check the condition of the disc, connected device and recorded tracks. Ensure the terminals of the speaker leads are properly insulated with tape before resetting the unit. ( page 3) If the message does not disappear, consult your JVC car audio dealer or kits supplying company. [. . . ]