User manual JVC KD-R461E

[. . . ] ENGLISH FRANÇAIS KD-R761 / KD-R661 / KD-R567 / KD-R561 / KD-R469 / KD-R467 / KD-R464 / KD-R462 / KD-R461 CD RECEIVER INSTRUCTION MANUAL RÉCEPTEUR CD MANUEL D’INSTRUCTIONS Please read all instructions carefully before operation to obtain the best possible performance from the unit. Indd 1 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 17/10/2014 11:15:47 AM For Israel Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. [. . . ] (  17) EASY EQ ON / OFF: Turns on or off the subwoofer output. THROUGH: All signals are sent to the subwoofer. ; LOW 55HZ / MID 85HZ / HIGH 120HZ: Audio signals with frequencies lower than 55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer. REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [SUB. €05 — +05 (00): Presets the volume adjustment level of each source (compared to the FM volume level). Before adjustment, select the source you want to adjust. (“VOL ADJ FIX” appears if FM is selected. ) LOW POWER: Limits the maximum volume level to 30. (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers. 3 Adjust the sound elements of the selected sound tone. LOUD 01 / 02: Boosts low or high frequencies to produce a well-balanced sound at low volume. (  11) This adjustment will not affect the subwoofer output. EXP (Digital Track Expander) TEL MUTING *5 SPK/PRE OUT ON: Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression. ON: Mutes the sounds while using the cellular phone (not connected through KS-BTA100). Selects the appropriate setting to get the desired output. DISPLAY SETTINGS KD-R761 KD-R567 / KD-R561 *5 Does not work if [BT ADAPTER] is selected for [AUX] in [SRC SELECT]. 2 Turn the volume knob to make a selection (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow 4 Press the instructions stated on the selected item. To return to the previous setting item, press . Default: XX DISPLAY DIMMER R (right) Rear speakers output Rear speakers output (Mute) Selects the display and button illumination adjusted in the [BRIGHTNESS] setting.  ; DIMMER TIME: Adjusts the dimmer on and off time. [. . . ] If the maximum power of the speakers is lower than 50 W, change the [AMP GAIN] setting to avoid damaging the speakers. (  10) • Mount the unit at an angle of less than 30º. € If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key. • Keep all cables away from heat dissipate metal parts. [. . . ]