User manual JVC KD-R611

[. . . ] Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and/or invisible class 1M laser radiation when open. [. . . ] MUTING 1/ : Select either one which mutes the sounds MUTING 2 while using a mobile phone. LOW POWER : VOLUME 00 ­ VOLUME 30 (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers. : You can select the playback speed of the "Audiobook" sound file in your iPod. Initial selected item depends on your iPod setting. *13 The volume level automatically changes to "VOLUME 30" if you change to <LOW POWER> with the volume level set higher than "VOLUME 30. " *14 Displayed only when any source other than "AM" is selected. *15 Displayed only when any source other than "EXT IN" is selected. *16 Displayed only when any source other than "AUX IN" is selected. *17 Displayed only when an iPod is connected and playback is controlled from the unit. You can select your preferred color for buttons illumination (except for EQ/BASS-TRE / DISP ) and display color separately. Pressing COLOR in step 1 will enter zone selection menu (BUTTON ZONE / DISP ZONE / ALL ZONE) directly. Repeat steps 2 and 3 to select a different zone and your preferred color. If <ALL ZONE> is selected in step 2, the buttons and display illumination changed to the current/selected <BUTTON ZONE> color. You can also change the <ALL ZONE> color to one of your preferred color by performing step 3. ] Select your preferred color from one of the 29 preset colors or <USER> color. Creating your own day and night colors--USER You can create your own colors for <DAY COLOR> and <NIGHT COLOR> to apply to button zone and display zone. Press T/P BACK after step 5, then select DISP ZONE in step 2. Press T/P BACK after step 5, then select NIGHT COLOR in step 2. Pressing COLOR in step 1 will enter zone selection menu (BUTTON ZONE / DISP ZONE) directly. If "00" is selected for all the primary colors (as in step 4) for <DISP ZONE>, nothing appear on the display. More about this unit If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power. If no operation is done for about 60 seconds after pressing MENU button, the operation will be canceled. [. . . ] The unit does not make pairing · Enter the same PIN code for both the unit and target with the Bluetooth device. Select the device name from "SPECIAL, " then try to connect again. ( 13) · Try to pair/connect from the Bluetooth device. Reduce the distance between the unit and the Bluetooth mobile phone. [. . . ]