User manual JVC KD-R751E

[. . . ] ENGLISH FRANÇAIS KD-R841BT / KD-R741BT CD RECEIVER INSTRUCTION MANUAL RÉCEPTEUR CD Please read all instructions carefully before operation to obtain the best possible performance from the unit. Indd 1 1/4/13 2:06:47 PM Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. [. . . ] RECENT CALL 1 Turn the volume knob to select a name or a phone number. € “>” indicates call received, “<“ indicates call made, “M” indicates call missed. € “NO HISTORY” appears if there is no recorded call history. 1 Turn the volume knob to select a name, then press the knob. 2 Turn the volume knob to select a phone number, then press the knob to call. € If the phonebook contains many numbers, you can fast search for the desired number by turning the control dial quickly, or use Character Search. (➜ 11) • “NO DATA” appears if no entries are found in the Bluetooth device’s phonebook. BOOK SEL] is set to [PB IN UNIT] or the phone does not support PBAP. 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +). 2 Press E / F to move the entry position. Repeat steps 1 and 2 until you finish entering the phone number. (➜ 12) AUTO ANSWER RING TONE PHONEBOOK RING COLOR ECHO CANCEL MIC LEVEL MSG NOTICE DIAL NUMBER * Selectable only when the connected phone supports PBAP. Character search You can search through the contacts quickly according to the first character (A to Z, 0 to 9, and OTHERS). € “OTHERS” appear if the first character is other than A to Z, 0 to 9. Turn the volume knob to select [PHONEBOOK], then press the knob. press 1 ∞ / 2 5 to select the desired character. Turn the volume knob to select the desired contact, then press the knob to call. eNGLISH 1/4/13 2:07:34 PM BLUETOOTH® Use Voice Recognition 1 Press and hold to enter Voice Recognition mode. If two phones are connected, turn the volume knob to select the desired phone, then press the knob. 2 Speak the name of the contact you want to call or the voice command to control the phone functions. • Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details. [. . . ] € Disconnect the battery’s negative terminal before wiring and mounting. € Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit. € Insulate unconnected wires with vinyl tape to prevent a short circuit. € Be sure to ground this unit to the car’s chassis again after installation. [. . . ]