User manual JVC KD-R881 BT

[. . . ] Indd 1 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 8/8/2016 10:25:00 PM CONTENTS BEFORE USE BASICS GETTING STARTED 1 Cancel the demonstration 2 Set the clock and date 3 Set the basic settings BEFORE USE 2 3 4 IMPORTANT • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warning and Caution in this manual. € Please keep the manual in a safe and accessible place for future reference. WARNING 5 7 • Do not operate any function that takes your attention away from safe driving. [. . . ] ( 4) 1 Open the Pandora application on your device. The source switches and broadcast starts automatically. € You can operate Pandora in the same way as Pandora via USB input terminal. ( 9) ANDROID ANDROID LIST*: Selects the Android smartphone to use from the list. Indd 16 AUX Use a portable audio player 1 Connect a portable audio player (commercially available). 3 Repeat step 2 until the desired item is selected/activated or follow 4 Press the instructions stated on the selected item. To return to the previous setting item, press . 4 Turn on the portable audio player and start playback. Use a 3-core plug head stereo mini plug for optimum audio output. pRESET EQ Select a preset equalizer suitable to the music genre. € Select [USER] to use the settings made in [EASY EQ] or [PRO EQ]. FLAT/DRVN 3/DRVN 2/DRVN 1/HARD ROCK/HIP HOP/JAZZ/POP/ R&B/USER/CLASSICAL Drive equalizer (DRVN 3/DRVN 2/DRVN 1) boosts specific frequencies in the audio signal to reduce the noise heard from outside the car or running noise of the tyres. • The settings are stored to [USER]. € The settings made may affect the current settings of [PRO EQ]. Indd 17 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 17 8/8/2016 10:24:29 PM AUDIO SETTINGS PRO EQ Adjust your own sound settings. • The settings are stored to [USER]. € The settings made may affect the current settings of [EASY EQ]. LEVEL –15 to LEVEL +06 (LEVEL 00): Preset the initial volume level of each source (compared to the FM volume level). Before adjustment, select the source you want to adjust. LOW POWER: Limits the maximum volume level to 25. (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers. ) Depending on the speaker connection method, select the appropriate setting to get the desired output. [. . . ] (E) Extraction key When installing without the mounting sleeve 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (commercially available). How to remove the unit Output terminals For 2-way crossover setting KD-R881BT REAR FRONT SW FRONT REAR/SW REAR FRONT SW FRONT REAR/SW : : : : : : : : : : Rear output Front output Subwoofer output Front output Rear/subwoofer output Tweeter output Mid Range output Woofer output Mid Range output Woofer output KD-R781BT For 3-way crossover setting KD-R881BT KD-R781BT Use only the specified screws. Using wrong screws might damage the unit. [. . . ]