User manual JVC KD-R90BT

[. . . ] ENGLISH FRANÇAIS KD-R90BT CD RECEIVER / RÉCEPTEUR CD For canceling the display demonstration, see page 4. / Pour annuler la démonstration des affichages , référez-vous à la page 4. For installation and connections, refer to the separate manual. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. [. . . ] Storing your own adjustments You can customize the preset sound mode <USER>. The active preset sound mode (FLAT/ NATURAL/DYNAMIC/VOCAL/BASS) will be used as a reference for your customization. The adjustments are stored and <USER> is activated. 1 (Hold) ENGLISH | 19 KD-R90BT_E_EN 2012/2/15 17:53:26 Sound adjustments Setting “My Sound EQ” My Sound EQ lets you customize the sound through five steps involving different types of musical instruments. Your adjustments are stored in SOUND1/2/3 and can be easily selected via the EQ button. Sound +6 PUSH Step 1 To set “My Sound EQ” with default music 1 (Hold) You can also compare the results with a flat EQ. Result Flat Default Music: Sample music pre-stored in the unit. Optional Music*: Sample music of various genres stored in the connected USB device. 3 Customize sound level for each step (instrument). Select step (instrument) Adjust the level The adjustments are stored and <SOUND 1/2/3> is activated. To store another sound mode, repeat steps 1 to 6. To set “My Sound EQ” with Optional music Step 1: Adjust the overall sound level. Step 2: Adjust low frequency sound level. Bass) Step 3: Adjust middle frequency sound level. 2 Download your preferred music sample (<. 5 Follow steps 1 through 6 in “To set “My Sound EQ” with default music” whilst selecting <Optional Music> in step 2. Jms> files in only one of the USB devices if two USB devices are connected at the same time. Result 20 | ENGLISH KD-R90BT_E_EN 2012/2/15 17:53:26 Sound adjustments Setting the speaker output timing — Time Alignment Ideal listening experience is achieved when the distance between each speaker and the listener is the same. Time alignment emulates this effect by synchronizing each speaker to compensate for the delay between each speaker and the listener. Before time alignment 1 2 After time alignment If you want to customize the distance between each speaker and the listening position from the preset data, proceed with the following steps. ( page 25) Select the distance between the listening position and the speaker. 6 ft 4 Select the seat position for the best listening experience. [. . . ] Reduce the distance from the microphone when you speak the name. change “NR/EC Mode” to “Off” ( page 16) , then try again. The connected phone does not support this feature. The device is registered but the connection has failed. [. . . ]