User manual JVC KD-R921BT

[. . . ] Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and/or invisible class 1M laser radiation when open. [. . . ] Message Notice On [Initial] : The unit informs you of the arrival of a message by ringing and displaying "[Device name] Received Message. " / Off : The unit does not inform you of the arrival of a message. When a call comes in, the source is automatically changed to "BT FRONT/ BT REAR. The unit answers the incoming calls automatically. ⷠTurn the control dial to adjust the phone volume level [ 00 ­ 50 ]. [ Initial: VOL 15 ] The adjustment made will not affect the other sources. (As the number increases, the microphone becomes more sensitive. To switch conversation media (the unit/ mobile phone) Press the control dial during a phone call conversation, then continue your conversation using the other media. ⷠOperations may be different according to the connected Bluetooth device. To switch between two connected mobile phones When two mobile phones are connected to the unit, you can access to both "HF Menu" screens. When a text message comes in, the unit rings if your mobile phone is compatible with text message and "Message Notice" is set to "On. You cannot read, edit, or send a message through the unit. If you wish to perform complicated operations (such as dialing the numbers, using phonebook, etc. ⷠSome Bluetooth devices may not be connected to this unit depending on the Bluetooth version of the device. ⷠIf you connect a different USB Bluetooth Adapter, all the registered devices and information will be cleared. ⷠThis unit and some of the functions may not work for some Bluetooth devices. ⷠConnecting condition may vary depending on the circumstances around you. ⷠIf you turn off the unit, detach the control panel, or unplug the USB Bluetooth Adapter during a phone call conversation, the Bluetooth connection is disconnected. When the unit is turned off, the device is disconnected. ⷠIf you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www. Using a Bluetooth audio player " If playback does not start automatically, operate the Bluetooth audio player to start playback. Repeat Track : Repeats current track All : Repeats all tracks Group : Repeats all tracks of the current group Random All : Randomly plays all tracks Group : Randomly plays all tracks of the current group To cancel repeat play or random play, select "Off. [. . . ] While playing a track, sound is sometimes interrupted. Reduce the distance between the unit and the Bluetooth mobile phone. / Move the car to a place where you can get a better signal reception. The unit does not response when you You may have tried to copy the same entries (as stored) to the tried to copy the phonebook to the unit. [. . . ]