User manual JVC KD-R981 BT

[. . . ] Indd 1 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 8/16/2016 10:43:28 AM Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. [. . . ] – You change from iPod USB source to iPod BT source. Default: XX * Pressing the “Play” key on the connected device itself also causes switching of sound output from the device. Operations and display indications may differ according to their availability on the connected device. Settings to use JVC Remote application JVC Remote application is designed to control the JVC car receiver’s operations from the following devices. Preparation: Install the latest version of JVC Remote application on your device before connecting. For more information, visit <http://www. ANDROID LIST*: Selects the Android smartphone to use from the list. STATUS Shows the status of the selected device. IOS CONNECTED: You are able to use the application using the iPhone/iPod connected via Bluetooth or USB input terminal. iOS NOT CONNECTED: No IOS device is connected to use the application. ANDROID CONNECTED: You are able to use the application using the Android smartphone connected via Bluetooth. 2 KD-R981BT/KD-R784BT/KD-R782BT: Turn the volume knob to select an item (see the following table), then press the knob. KD-R889BT/KD-R881BT: Press to select an item (see the following table), then press . 3 Repeat step 2 until the desired item is selected or activated. To return to the previous setting item, press . Listen to iPhone/iPod via Bluetooth (for KD-R981BT/KD-R889BT/ KD-R881BT) You can listen to the songs on the iPhone/iPod via Bluetooth on this unit. press (for KD-R981BT) or (for KD-R889BT/KD-R881BT) repeatedly to select iPod BT. € You can operate the iPod/iPhone in the same way as iPod/iPhone via USB input terminal. ( 8) • If you plug in an iPhone/iPod to the USB input terminal while listening to iPod BT source, the source automatically change to iPod USB. 2 KD-R981BT/KD-R784BT/KD-R782BT: Turn the volume knob to select an item (see the following table), then press the knob. KD-R889BT/KD-R881BT: Press to select an item (see the following table), then press . 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. [. . . ] Dashboard of your car (E) Extraction key Bend the appropriate tabs to hold the sleeve firmly in place. (D) Wiring harness (B) Trim plate When installing without the mounting sleeve 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (commercially available). How to remove the unit Output terminals For 2-way crossover setting 3 pairs REAR FRONT SW FRONT REAR/SW REAR/SW REAR FRONT SW FRONT REAR/SW REAR/SW : : : : : : : : : : : : Rear output Front output Subwoofer output Front output Rear/subwoofer output Rear/subwoofer output Tweeter output Mid Range output Woofer output Mid Range output Woofer output Woofer output 2 pairs 1 pair 3 pairs For 3-way crossover setting Use only the specified screws. [. . . ]