User manual JVC KD-S636

[. . . ] CD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVER KD-S636 /I/ATT KD-S636 35WX4 SOUND SEL SSM LOUD MO RND RPT DISP 7 8 9 10 11 12 SCAN 1 2 3 4 5 6 AM FM CD COMPACT DIGITAL AUDIO For installation and connections, refer to the separate manual. Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch. Pour l'installation et les raccordements, se référer au manuel séparé. Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de desbetreffende handleiding. INSTRUCTIONS BEDIENUNGSANLEITUNG MANUEL D'INSTRUCTIONS GEBRUIKSAANWIJZING FSUN3039-311S [E] NEDERLANDS FRANÇAIS DEUTSCH ENGLISH Position and Reproduction of Labels Bottom of the main unit DANGER: Invisible laser radiation when open and interlock failed or defeated. [. . . ] 3 Press SSM ¢ or SSM 4 repeatedly until the frequency you want is reached. · If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM -- MW/LW) until you release the button. 5 Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. · Automatic preset of FM stations: SSM (Strong-station Sequential Memory) · Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3). 2 1 Select the FM band number (FM1, FM2 or FM3) you want to store FM stations into. FM1 FM2 FM3 1 FM 2 SSM Press and hold the both buttons for more than 3 seconds. "SSM" appears, then disappears when automatic preset is over. Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2 or FM3). These stations are preset in the number buttons -- No. When automatic preset is over, the station stored in number button 1 will be automatically tuned in. 6 You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. EXAMPLE: Storing an FM station of 88. 3 MHz into the preset number 1 of the FM1 band 23 1 1 FM Select the FM1 band. 2 SSM Tune into a station of 88. 3 MHz. See page 5 to tune into a station. 3 1 2 Press and hold the button for more than 1 second. Preset number "1" starts flashing for a while. 4 Repeat the above procedure to store other stations into other preset numbers. Notes: · A previously preset station is erased when a new station is stored in the same preset number. · Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again. 7 ENGLISH Manual preset Tuning into a preset station You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see pages 6 and 7. 2 1 1 AM FM Select the band (FM1, FM2, FM3 or AM) you want. FM1 FM2 FM3 AM 2 1 2 3 4 5 6 Select the number (1 ­ 6) for the preset station you want. 8 MO RND SCAN Scanning broadcast stations When you press SCAN while listening to the radio, station scanning starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes on the display), and you can check what program is now being broadcast. If you want to listen to that program, press the same button again to stop scanning. Selecting FM reception sound When an FM stereo broadcast is hard to receive: Press MO RND (mono/random) while listening to an FM stereo broadcast. The sound you hear becomes monaural but reception will be improved. Lights when receiving an FM broadcast in stereo. ST MO To restore the stereo effect, press the same button again. 9 ENGLISH Other convenient tuner functions CD OPERATIONS Playing a CD 1 1 Insert a disc into the loading slot. The unit turns on, draws a CD and starts playback automatically. · When a CD is inserted upside down, "EJECT" appears on the display and the CD automatically ejects. Total playing time of the inserted disc Total track number of the inserted disc Elapsed playing time Current track Note on One-Touch Operation: When a CD is already in the loading slot, pressing CD turns on the unit and starts playback automatically. CAUTION on Volume Setting CDs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume before playing a CD and adjust it as required during playback. Press 0. CD play stops and the CD automatically ejects from the loading slot. The source changes to the tuner (you will hear the last received station). If you change the source to AM or FM, the CD play also stops (without ejecting the CD this time). · If the ejected disc is not removed for about 15 seconds , the disc is automatically inserted again into the loading slot to protect it from dust. [. . . ] · Do not expose CDs to direct sunlight or any heat source or place them in a place subject to high temperature and humidity. · Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc. ) to clean CDs. About mistracking: Mistracking may result from driving on extremely rough roads. This does not damage the unit and the CD, but will be annoying. We recommend that you stop CD play while driving on such rough roads. [. . . ]