User manual JVC KD-S9

[. . . ] CD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVER KD-S9R /I / ATT 45Wx4 DISP RDS TP MO RND SSM RPT PTY 7 8 9 10 11 12 SCM AM FM CD For installation and connections, refer to the separate manual. Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch. Pour l'installation et les raccordements, se référer au manuel séparé. Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de desbetreffende handleiding. INSTRUCTIONS BEDIENUNGSANLEITUNG MANUEL D'INSTRUCTIONS GEBRUIKSAANWIJZING GET0007-001A [E] NEDERLANDS FRANÇAIS DEUTSCH ENGLISH Position And Reproduction Of Labels ENGLISH Bottom panel of the main unit DANGER: Invisible laser radiation when open and interlock failed ordefeated. [. . . ] 2 Press ¢ or 4 to select "P(Programme)-SEARCH. " 3 Rotate the control dial clockwise to select "ON. " Now programme search is activated. To cancel programme search, repeat the same procedure and select "OFF" in step 3 by rotating the control dial counterclockwise. You can preset the volume level for TA Standby Reception. When a traffic programme is received, the volume level automatically changes to the preset level. · See also "Changing the general settings (PSM)" on page 19. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. 2 Press ¢ or 4 to select "TA VOL. " 3 Rotate the control dial to set to the desired volume. You can set it from "VOL 00" to "VOL 50. " Automatic clock adjustment Changing the display mode while listening to an FM station You can change the initial indication on the display to either station name (PS NAME) or to station frequency (FREQ), while listening to an FM RDS station. · See also "Changing the general settings (PSM)" on page 19. When shipped from the factory, the clock built in this unit is set to be readjusted automatically using the CT (Clock Time) data in the RDS signal. If you do not want to use automatic clock adjustment, follow the procedure below. · See also "Changing the general settings (PSM)" on page 19. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. 2 Press ¢ or 4 to select "AUTO ADJ. " 3 Rotate the control dial counterclockwise to select "OFF. " Now automatic clock adjustment is canceled. To reactivate clock adjustment, repeat the same procedure and select "ON" in step 3 by rotating the control dial clockwise. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. 2 Press ¢ or 4 to select "TU DISP (tuner display). " 3 Rotate the control dial to set to the desired indication ("PS NAME" or "FREQ"). Note: By pressing DISP, you can also change the display while listening to an FM RDS station. Each time you press the button, the following information appears on the display: Station name Station frequency (PS NAME) (FREQ) Programme type (PTY) · Then, the display goes back to the original indication in several seconds. Note: It takes about 2 minutes to adjust the time using the CT data. So, you should not change the station for more than 2 minutes continuously; otherwise, the clock time will not be adjusted. 13 ENGLISH To activate programme search, follow the procedure below. · Programme search takes a while. · See also "Changing the general settings (PSM)" on page 19. Setting the TA volume level CD OPERATIONS ENGLISH /I / ATT DISP RDS TP MO RND SSM RPT PTY 7 8 9 10 11 12 SCM AM FM CD Playing a CD 1 Open the control panel. Note on One-Touch Operation: When a CD is already in the loading slot, pressing CD turns on the unit and starts playback automatically. Notes: · When a CD is inserted upside down, "PLEASE" and "EJECT" appear on the display alternately. When you open the control panel by pressing 0, the CD automatically ejects. · When you play a CD Text, the disc title and performer appear on the display. Then the current track and elapsed playing time appears on the display. See also "Playing a CD Text" (page 16) and "To select the scroll mode ­ SCROLL" (page 21). If a CD Text includes much text information, some may not appear on the display. 2 Insert a disc into the loading slot. The unit turns on, draws a CD and starts playback automatically. To stop play and eject the CD Press 0. [. . . ] · If it becomes very humid inside the car. Should this occur, the CD player may malfunction. In this case, eject the CD and leave the unit turned on for a few hours until the moisture evaporates. DIGITAL AUDIO · Other discs cannot be played back. How to handle CDs Center holder When removing a CD from its case, press down the center holder of the case and lift the CD out, holding it by the edges. · Always hold the CD by the edges. [. . . ]