User manual JVC KD-SX1000

[. . . ] CD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVER KD-SX1000R Detachable /I ATT SEL KD-SX1000R 40WX4 SSM TP RDS PTY LO/RPT INT 8 9 VCR CONTROL 10 11 12 DISP MO/RND TEXT 7 VCR EXT BAND SOUND 1 2 3 4 5 6 CD-CH TUNER CD For installation and connections, refer to the separate manual. Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesonderten Anleitung. Pour l'installtion et les reccordements, se référer au manuel séparé. Zie de afzonderlijke handleiding voor details aangaande het installeren en verbinden van het toestel. INSTRUCTIONS BEDIENUNGSANLEITUNG MANUEL D'INSTRUCTIONS GEBRUIKSAANWIJZING VNN3874-312S [E] NEDERLANDS FRANÇAIS DEUTSCH ENGLISH Position And Reproduction Of Labels Bottom panel of the main unit DANGER: Invisible laser radiation when open and interlock failed or defeated. [. . . ] 2 Adjust the hour. 4 1 SSM 5 2 Set the minute. 1 Select "CLOCK MINUTE. " 2 Adjust the minute. 6 DISP Start the clock. To check the current clock time while the unit is turned off, press DISP. The power turns on, the clock time is shown for 5 seconds, then the power turns off. 26 You can change the items listed on the next page by using the PSM (Preferred Setting Mode) control. Basic Procedure 1 3 2 Press and hold the button for more than 2 seconds so that "PSM" appears on the lower part of the display. 1 SEL 2 SSM Select the PSM item you want to adjust. (See page 28. ) 3 Select or adjust the PSM item selected above. 27 ENGLISH Changing the general settings (PSM) 1 SEL 2 Select. SSM 3 Set. Back Back 12HOUR Advance Factory-preset settings See page CLOCK HOUR CLOCK MINUTE CLOCK24H/12H Hour adjustment Minute adjustment 24/12-hour time display Automatic setting of the clock Display mode PTY standby PTY search Traffic announcement volume Level display 0:00 Advance 24HOUR ON PS NAME 24HOUR ON PS NAME NEWS (See page 12. ) VOL (20) 26 29 16 15 12 12 15 AUTO ADJUST OFF FREQUENCY DISPLAY MODE PTY STANDBY PTY SEARCH TA VOLUME 29 programme types (See page 17. ) VOL (00-50) NORMAL OFF PEAK LEVEL METER NORMAL 29 DIMMER MODE Dimmer AUTO ON OFF AUTO 29 CRUISE MODE Audio cruise 1 OFF 2 OFF 800 rpm 05 OFF ON ON 5 AUTO OFF ONCE 30 31 31 32 32 32 33 33 + OR ­ RPM SET BOOST TELEPHONE Idling speed * Boost * Audio mute for cellular phone system Key-touch tone Power amplifier switch Display contrast Name display OFF -- 01 ­15 MUTING 1 MUTING 2 OFF OFF 1 ­10 ONCE ON ON BEEP SWITCH P. AMP SWITCH CONTRAST SCROLL MODE * When you select "1" or "2" for Audio Cruise Mode, you can adjust these items. · Press SEL (Select) when the setting is complete. 28 You can change the clock built in this unit either to 24 hour system or 12 hour system. Press and hold SEL (Select) for more than 2 seconds so that "PSM" appears on the lower part of the display. Select the "CLOCK24H/12H" mode with ¢ or 4 . Select "CLOCK 24HOUR" or "CLOCK 12HOUR" with the control dial. The clock built alternates between 24 hour system and 12 hour system. 24HOUR 12HOUR Selecting the level display You can select the level display according to your preference. When shipped from the factory, the level indicator on the display shows the audio level. · NORMAL: Audio level indicator · PEAK: Peak level indicator · OFF: Volume level indicator 1. Press and hold SEL (Select) for more than 2 seconds so that "PSM" appears on the lower part of the display. Select "LEVEL METER" with ¢ or 4 . Select the desired mode with the control dial. The level display setting changes as follows: NORMAL PEAK OFF Selecting the dimmer mode When you turn on the car head lights, the display automatically dims (Auto Dimmer). When shipped from the factory, Auto Dimmer mode is activated. · AUTO: Activates Auto Dimmer · ON: Always dims the display · OFF: Cancels Auto Dimmer 1. Press and hold SEL (Select) for more than 2 seconds so that "PSM" appears on the lower part of the display. Select "DIMMER MODE" with ¢ or 4 . Select the desired mode with the control dial. [. . . ] · Do not expose CDs to direct sunlight or any heat source or place them in a place subject to high temperature and humidity. · Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc. ) to clean CDs. About mistracking: Mistracking may result from driving on extremely rough roads. This does not damage the unit and the CD, but will be annoying. We recommend that you stop CD play while driving on such rough roads. [. . . ]