User manual JVC KD-X230

[. . . ] Indd 1 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 14/8/2015 11:59:36 AM Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. [. . . ] 4 Turn the volume knob to select an item, then press the knob. 5× SPEED / 1× SPEED / 2× SPEED: Select the desired playback speed of the Audiobooks sound file in your iPod/iPhone. To return to the previous setting item, press . (Select [USER] to use the settings made in [EASY EQ]. ) FLAT (Default) / HARD ROCK / HIP HOP / JAZZ / POP / R&B / TALK / USER / VOCAL BOOST / BASS BOOST / CLASSICAL / DANCE Adjust your own sound settings. 2 Adjust the sound elements of the selected sound tone. (or) Press , then turn the volume knob within 5 seconds. Preset equalizer: FLAT (default), HARD ROCK, HIP HOP, JAZZ, POP, R&B, TALK, USER, VOCAL BOOST, BASS BOOST, CLASSICAL, DANCE EASY EQ PRO EQ Store your own sound settings to enter EASY EQ setting. 1 Press and hold 2 Turn the volume knob to select an item, then press the knob. Refer to [EASY EQ] for setting and the result is stored to [USER]. € To return to the previous setting item, press . 1 Press and hold 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. To return to the previous setting item, press . LOUD 01 / 02: Boosts low or high frequencies to produce a well-balanced sound at low volume. W LEVEL *4 SPK-OUT *5 PRE-OUT *6 00 to +06 (+03): Adjusts the output level of the subwoofer connected via speaker lead. (  15) –08 to +08 (00): Adjusts the output level of the subwoofer connected to the lineout terminals (REAR/SW) through an external amplifier. This adjustment will not affect the subwoofer output. Does not work if [BT ADAPTER] is selected for [AUX] in [SRC SELECT]. THROUGH: All signals are sent to the subwoofer. ; LOW 55HZ / MID 85HZ / HIGH 120HZ: Audio signals with frequencies lower than 55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer. Speaker output settings Select the output setting for the speakers [SPK/PRE OUT], base on the speaker connection method. [. . . ] Dashboard of your car Bend the appropriate tabs to hold the sleeve firmly in place. When installing without the mounting sleeve 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (commercially available). Using wrong screws might damage the unit. [. . . ]