User manual JVC KD-X310BTE

[. . . ] ENGLISH ESPAÑOL FRANÇAIS KD-X310BT / KD-X31MBS DIGITAL MEDIA RECEIVER INSTRUCTION MANUAL RECEPTOR DE MEDIOS DIGITALES MANUAL DE INSTRUCCIONES RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE MANUEL D’INSTRUCTIONS Please read all instructions carefully before operation to obtain the best possible performance from the unit. For customer Use: Enter below the Model No. Which are located on the top or bottom of the cabinet. Retain this information for future reference. [. . . ] € Operations may vary according to the connected Bluetooth mobile phone. Phone volume: [00] to [50] (Default: [15]) • This adjustment will not affect the volume of the other sources. Reject an incoming call End a call Activate or deactivate hands-free mode Adjust the phone volume The connectivity result flashes on the display. STREAM OK”*2 and/or “PBAP OK”*3 : Compatible *1 Compatible with Hands-Free Profile (HFP) *2 Compatible with Advanced Audio Distribution Profile (A2DP) *3 Compatible with Phonebook Access Profile (PBAP) After 30 seconds, “PAIRING DELETED” appears to indicate that pairing has been deleted, and the unit exits check mode. € To cancel, press and hold B /SOURCE to turn off the power, then turn on the power again. switch between two connected phones 14 JS_JVC_KD_X310BT_J_02_EN. Indd 14 12/13/2013 4:16:34 PM Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) BLUETOOTH® Improve the sound quality during a call While talking on the phone. 2 Turn the volume knob to make a selection (see the following table), then press the knob. To return to the previous setting item or hierarchy, press G PTY. Default: XX MIC LEVEL NOISE RDCT ECHO CANCEL –20 — +08 (0): The sensitivity of the microphone increases as the number increased. €05 — –20 (–10): Adjust the noise reduction level until the least noise is being heard during a phone conversation. 1 — 10 (4): Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation. pHONEBOOK Bluetooth mode operations to enter Bluetooth mode. 1 Press 2 Turn the volume knob to make a selection (see the following table), then press the knob. To return to the previous setting item or hierarchy, press G PTY. RECENT CALL 1 Press the volume knob to select a name or a phone number. € “>” indicates call received, “<“ indicates call made, “M” indicates call missed. € “NO HISTORY” appears if there is no recorded call history or call number. 1 Turn the volume knob to select a name, then press the knob. 2 Turn the volume knob to select a phone number, then press the knob to call. € If the phone supports PBAP, the phonebook of the connected phone is automatically transferred to the unit when pairing. If the phone does not support PBAP, “SEND P. [. . . ] (  19) • Mount the unit at an angle of less than 30º. € If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key. € After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. € If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old fuse with one that has the same rating. [. . . ]