User manual JVC KSK6002J-KS-K6002 Instruction Manual

[. . . ] Car Docking Kit KS-K6002/KS-K6001 INSTALLATIONS LVT1195-001A [J] INFORMATION (Only for KS-K6002) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer for compliance could void the user's authority to operate the equipment. 2 Safety Precautions WARNINGS: Take the following precautions to prevent traffic accidents and avoid personal injury: · Installation must be performed according to this installation manual. [. . . ] Cigarette lighter adapter Fuse · To prevent a short circuit when replacing a fuse, first unplug the cigarette lighter adapter from the cigarette lighter. · When drilling holes to mount the unit, make sure not to damage wiring or other systems. 3 Box Contents After you unpack your Car Docking Kit, make sure everything here is included: Car Docking Cradle Suction Cup Mount Magnetic Roof-mount SIRIUS Antenna Cigarette Lighter Adapter Fuse (250 V/3A) Screws (M4 x 8 mm) Audio Cord (only for KS-K6001) Cassette Adapter (only for KS-K6001) For the latest information about this and other JVC PnP products, visit the JVC Web site at <http://www. jvcmobile. com>. If anything is missing or damaged, or if your Car Docking Kit fails to operate, notify your shipper immediately. It is recommended that you keep the original packaging in case you need to ship your Car Docking Kit in the future. 4 Installation in Your Car CAUTION: Do not put JVC PnP in the car docking cradle until you have completed the installation. 1 Determine where you want to mount JVC PnP. · Do not install JVC PnP where it may obstruct your view through the windshield or your view of your car's indicator displays. · Do not install JVC PnP where it will hinder your access to the car's controls. · Do not install JVC PnP where it may hinder the function of safety devices such as an airbag. Doing so may prevent the airbag from functioning properly in the event of an accident. · Find a location that provides good visibility of and access to JVC PnP's front panel. 2 Assemble the supplied suction cup mount to JVC PnP using the supplied screws. · When using other screws, use the screws of less than 8 mm long with a diameter of 4 mm. To be continued. . . 5 Installation in Your Car (Continued) CAUTION: Do not plug the cigarette lighter adapter into he cigarette lighter until you have completed the installation. 3 Plug the cigarette lighter adapter into the back of the cradle--DC 12V. 4 For KS-K6001: A If your car stereo does not have a line input (LINE IN or AUX). . . Plug the cassette adapter into the back of the cradle--AUDIO OUT. 6 Only for KS-K6002: An optional hard-wired FM transmitter--FM Switching Box Assembly (Parts No. By connecting this Assembly between the FM OUT terminal of the cradle and the antenna input terminal of your car stereo, you can obtain stable and reliable transmission/reception. 4 B If your car stereo has a line input (LINE IN or AUX). . . Plug the supplied audio cord into the back of the cradle--AUDIO OUT. · Plug the audio cable's white (L ch) and red (R ch) connectors into your car stereo. For KS-K6002: Activate the FM signal transmitter (refer to page 24 of KT-SR1000' Instructions), and set the FM frequency output selector to select one of the following frequencies--88. 1 MHz, 88. 3 MHz, 88. 5 MHz, and 88. 7 MHz. 88. 1 88. 3 88. 5 88. 7 MHz · It is recommended to preset the frequency selected by the FM frequency output selector into your car stereo so you can easily tune in to the frequency. Note: You can also connect a cassette adapter or an audio cord (both not supplied) to the AUDIO OUT jack to send the singals to your car stereo. 7 Finding the Best Antenna Mounting Location 1 Temporarily plug the antenna into the back of the cradle--SAT (MAIN) until it is firmly seated. 2 Find an antenna location on a metal surface of your car--at least 30 cm × 30 cm (12 inches × 12 inches), and at least 15 cm (6 inches) from a window. · The antenna's powerful magnet will secure it to the metal surface. · Best reception is achieved with the antenna mounted on the roof or trunk for convertibles. [. . . ] · You can use the supplied double-side adhesive tape to attach the antenna cord firmly. 4 From the trunk, route the cable around the passenger compartment and to the back of the cradle. CAUTION: · Do not pull the cable across sharp edges that could damage it. · Do not route the cable nearby areas where it could become tangled in driver's and passenger's feet. Note: It is strongly recommended to unplug the cigarette lighter adapter after you turn off the car ignition. 11 KS-K6002/KS-K6001 http://www. jvcmobile. com Visit us on-line for Technical Support & Customer Satisfaction Survey. US RESIDENTS ONLY Car Docking Kit Having TROUBLE with operation? USA ONLY Call 1-800-252-5722 http://www. jvc. com We can help you! VICTOR COMPANY OF JAPAN, LIMITED EN © 2003 VICTOR COMPANY OF JAPAN, LIMITED 1203MNMMDWKRI [. . . ]