User manual JVC KV-MRD900

[. . . ] This system cannot receive television broadcasts. Use the separately sold TV tuner unit KV-C1001 for There may be legal regulations defining the permissible installation locations for the monitor which differ by country or by state. Be sure to install the monitor in a correct location according to such laws. The driver must not operate the monitor while driving. [. . . ] For DVD playback, you can change the setup menu setting as you like. On some discs, you can also select items using the corresponding number buttons. To select a number greater than 9, see "How to select a number" on page 9. to return to the previous menus · For JPEG files: You cannot move the zoomed-in position when the entire picture is displayed on the monitor. For some discs, you can also move between the menus by pressing 4 / ¢. You can check the disc information and use some functions through the on-screen bar. For audio CD, CD Text, and MP3/WMA/ JPEG disc you can also use the control screen and list screen (see pages 26 and 27). PBC (only for VCD) 3 Playback information Current title/chapter T02-C03 Current track TRACK 01 TOTAL Elapsed playing time of the disc Remaining disc time (for VCD)/ T. REM remaining title time (for DVD) TIME Elapsed playing time of the current chapter/track Remaining time of the current REM chapter/track 4 Playback condition Playback Forward/reverse search Forward/reverse slow-motion Pause Stop 5 Operation icons Time indication TIME Time Search--Enter the elapsed playing time of the current title or of the disc. Repeat play (for DVD) OFF Repeat play (for other discs) REPEAT INTRO Intro play Random play RANDOM 6 Current playback mode The on-screen bar for a CD or MP3/WMA/ JPEG disc automatically disappears in a few seconds after the last operation. You can repeat the current title or chapter. When a JPEG disc is loaded, skip to step 3. You can repeat the current track (except for JPEG) or the tracks in the current folder (only for MP3/ WMA/JPEG). To enter 1 (hours): 02 (minutes): 00 (seconds), press 1, 0, 2, 0, then 0. To enter 54 (minutes): 00 (seconds), press 0, 5, 4, 0, then 0. It is always required to enter the hour digit (even "0" hour), but it is not required to enter trailing zeros (the last two digits in the examples above). You can randomly play all tracks in the disc, or in the current folder (only for MP3/WMA). You can also specify the elapsed playing time by using % / fi / @ / #. To correct a misentry, press the number button until the correct number is entered. You can play the first 15 seconds of all tracks in the disc, or in the current folder (only for MP3/ WMA). To search for a particular point by playing time You can search for and play the desired items through the control screen. Track : 5 / 14 Cloudy Fair Fog Hail Indian summer Rain Shower Snow Thunder Typhoon Wind Winter sky Current folder Current folder number/total folder number Folder list Selected playback mode Elapsed playing time of the current track (only for MP3/WMA) Operation mode icon (only for MP3/WMA) (play), 7 (stop), 8 (pause) Current track number/total number of tracks in the current folder (total number of tracks on the disc) Track information (only for MP3/WMA) Track list Current track (highlighted bar) 1 Selected playback mode 2 Elapsed playing time of the current track 3 Operation mode icon (play), 7 (stop), 8 (pause), ¡ (fastforward), 1 (reverse) 4 Current track number/total number of tracks on the disc 5 Track information 6 Track list 7 Current track (highlighted bar) You can display the folder list/track list before starting play. [. . . ] Check the following points before calling a service center. No picture appears and sound is not heard. This is a characteristic of liquid crystal panels and is not a malfunction. the cord is not connected correctly to the external component. [. . . ]