User manual JVC KW-AVX720

[. . . ] Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and/or invisible class 1M laser radiation when open. [. . . ] ) Title Search (by its number) Chapter Search (by its number) Track Search (by its number) Repeat play *1 Random play *1 Change the audio language, audio stream, or audio channel Change or turn off the subtitle language Change the view angle *1 For repeat play/random play, *2 While PBC is not in use. You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, portable HDD, etc. USB cable from the rear of the unit This unit can play JPEG/MPEG1/MPEG2/MP3/WMA/ WAV files stored in USB mass storage class device. You can operate the USB device in the same way you operate the files on discs. All tracks in the USB device will be played repeatedly until you change the source. Playback starts from where it has been stopped previously when you reconnect the same USB device again. Avoid using the USB device if it might hinder your safety driving. Do not pull out and attach the USB device repeatedly while "Now Reading" is shown on the screen. Do not start the car engine if a USB device is connected. This unit may not be able to play the files depending on the type of USB device. Operation and power supply may not work as intended for some USB devices. Make sure all important data has been backed up to avoid losing the data. Some USB devices may not work immediately after you turn on the power. For more details about USB operations, 53. Refer to the list (included in the box) to check the countries where you may use the Bluetooth ® function. To use a Bluetooth device through the unit (" Bluetooth PHONE" and " Bluetooth AUDIO") for the first time, you need to establish Bluetooth wireless connection between the unit and the device. Once the connection is established, it is registered in the unit even if you reset your unit. Up to five devices can be registered in total. Only one device can be connected at a time for each source (" Bluetooth PHONE" and " Bluetooth AUDIO"). Use either of the following items in <Bluetooth> menu to register and establish the connection with a device. Open Search Make the unit ready to establish a new Bluetooth connection. the connection is established by operating the Bluetooth device. [. . . ] Move the car to place where you can get a better signal reception. the sound is interrupted or · Reduce the distance between the unit and the Bluetooth audio skipped while using a Bluetooth player. (When the sound is not yet restored, ) connect the player again. "NEW DEVICE" cannot be selected Bluetooth audio player is already connected. [. . . ]