User manual JVC KW-AVX800 INSTALLATION

[. . . ] ­ it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident. DO NOT operate any unit while manipulating the steering wheel, as this may result in a traffic accident. The driver must not watch the monitor while driving. If the driver watches the monitor while driving, it may lead to carelessness and cause an accident. [. . . ] The following illustration shows a typical installation. However, you should make adjustments corresponding to your specific car. If you have any questions or require information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. If you are not sure how to install this unit correctly, have it installed by a qualified technician. Before installing the unit When mounting the unit, be sure to use the screws provided, as instructed. If other screws are used, parts could become loose or damaged. When tightening screws or bolts, be careful not to pinch any connection cord. Make sure not to block the fan on the rear panel to maintain proper ventilation when installed. Be sure to keep all the screws and parts removed from your car for future use. When attaching the brackets to this unit, make sure to use the supplied flat head screws (M5 x 8 mm). If longer screws are used, they could damage the unit. Install the unit at an angle of less than 30°, taking it into account that the monitor would eject when in use (see left). To prevent short circuits, we recommend that you disconnect the battery's negative terminal and make all electrical connections before installing the unit. Be sure to ground this unit to the car's chassis again after installation. DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be seriously damaged. BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in your car. If your car is equipped with the ISO connector Si su automóvil está equipado con el conector ISO Si votre voiture est équippée d'un connecteur ISO You may need to modify the wiring of the supplied power cord as illustrated. Contact your authorized car dealer before installing this unit. From the car body Desde la carrocería del vehículo De la carrosserie de la voiture ISO connector of the supplied power cord Conector ISO del cable de alimentación suministrado Connecteur ISO pour le cordon d'alimentation fourni View from the lead side Vista desde el lado del conductor Vue à partir du côté des fils Modified wiring 2 / Conexionado modificado 2 / Câblage modi é 2 Use modified wiring 2 if the unit does not turn on. Connect the parking brake lead to the parking brake system built in the car. [. . . ] ) · Disconnect the speakers from the unit, and connect them to the amplifier. Leave the speaker leads of the unit unused. *5 Firmly attach the ground wire to the metallic body or to the chassis of the car--to the place uncoated with paint (if coated with paint, remove the paint before attaching the wire). Before connecting the external components, make sure that the unit is turned off. [. . . ]