User manual JVC KW-NT3

[. . . ] Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments. [. . . ] The track information appears when it is recorded. Sound mode ( page 63) Playback status (8: pause) Tag data appears only when it is recorded. * When switching the folder, the folder name and file name appear for about 5 seconds even if tag data is recorded. This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder). This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing. Some discs or files may not be played back due to their characteristics or recording conditions. You cannot activate the repeat mode and the random mode at the same time. FOLDER Randomly plays all tracks of current folder, then tracks of next folders. This setting is valid only to the external monitor connected. Select the monitor type to watch a wide screen picture on the external monitor. When you select <16:9> for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width. Even if <4:3PS> is selected, the screen size may become <4:3LB> for some discs. You can enjoy a powerful sound at a low volume level while playing Dolby Digital software. auto : Select to apply the effect to multi-channel encoded software. On : Select to always use this function. This unit has its own Registration Code. Once you have played back a file with which the Registration Code recorded, this unit's Registration Code is overwritten for copyright protection. This unit can play the MP3/WMA files stored in SD card/USB mass storage class device. All tracks in the SD card/USB device will be played repeatedly until you change the source. You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, etc. When connecting a USB device, refer also to its instructions. Push in the SD card until you hear a clicking sound. [. . . ] Check whether <AV Input> setting is correct for "AVIN". No operations are available when playing back a track containing artwork. Remedies/Causes This unit can be connected with one Bluetooth device at a time. While connected to a device, this unit cannot be detected from another device. [. . . ]