User manual JVC KW-R500

[. . . ] ENGLISH FRANÇAIS KW-R500/KW-R400 CD RECEIVER / RÉCEPTEUR CD For canceling the display demonstration, see page 4. / Pour annuler la démonstration des affichages , référez-vous à la page 4. For installation and connections, refer to the separate manual. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. [. . . ] Use a 3-terminal plug head stereo mini plug for optimum audio output. Otherwise, sound may be interrupted or unclear while listening to an external component. Bluetoothா For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (separately purchased) to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of the unit. ( Installation/Connection Manual) KS-BTA100 is not available in some countries. Please contact your dealer where you purchased this unit. Operations may be different depending on the connected Bluetooth device. For details, refer also to the instructions supplied with the device. KS-BTA100 Preparation For details on registering and using the Bluetooth device, refer to the instructions manual supplied with KS-BTA100. 1 Register (pair) a Bluetooth device with KS-BTA100. 2 Change the <SRC SELECT> settings of this unit. Selecting the preset color You can select a preset color for <BUTTON ZONE>, <DISP ZONE>, and <ALL ZONE> separately. Storing your own adjustments You can store your own day and night colors for <BUTTON ZONE> and <DISP ZONE> separately. 3 3 BUTTON ZONE DAY COLOR DISP ZONE BUTTON ZONE NIGHT COLOR DISP ZONE ON MENU COLOR OFF Select a primary color <RED/GREEN/ BLUE>, and then adjust the level <00-31>. Repeat this procedure until you have adjusted all the three primary colors. your adjustment is automatically stored to “USER”. If “00” is selected for all the primary colors for <DISP ZONE>, nothing appears on the display. Changes the display and buttons illumination during menu, list search, and playback mode operations. BUTTON ZONE DISP ZONE ALL ZONE COLOR 01-29/USER/ COLOR FLOW 01-03* * Color changes in different speeds. The illumination control lead connection is required. (See “Installation/Connection Manual”. ) This setting may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this case, change the setting to other than <DIMMER AUTO>. [. . . ] * Remedy/Cause Check the cords , aerial and cable connections. Check the condition of the disc, connected device and recorded tracks. Ensure the terminals of the speaker leads are properly insulated with tape before resetting the unit. ( page 3) If the message does not disappear, consult your JVC car audio dealer or kits supplying company. [. . . ]