User manual JVC LT-20BW7BJ

[. . . ] LT-20BW7BJ WIDE LCD PANEL TV INSTRUCTIONS ENGLISH Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of Victor Company of Japan, Limited is: JVC Technology Centre Europe GmbH Postfach 10 05 52 61145 Friedberg Germany Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer. If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. [. . . ] Manual: Your own customised picture mode. · You can also choose a Picture Mode and customise the Manual mode with the "Picture menu" (see page 20). Press the Sound Mode · The sound mode you can choose differs depending on the TV programme and input video. · You can also choose a Sound Mode with the "Sound menu" (see page 22). 15 Remote control buttons and functions Operating a JVC brand VCR or DVD player These buttons will operate a JVC brand VCR or DVD player. Pressing a button that looks the same as the device's original remote control button has the same effect as the original remote control. 1 Set the VCR/TELETEXT/DVD Switch to the VCR or DVD position VCR: When you are operating the VCR, set the switch to the VCR position. · You can turn the VCR on or off with the (standby) button. DVD: When you are operating the DVD player, set the switch to the DVD position. · You can turn the DVD player on or off with the (standby) button. 2 Set the VCR/DVD control buttons to control your VCR or DVD player · If your device is not made by JVC, these buttons will not work. · Even if your device is made by JVC, some of these buttons may not work, depending on the device you are using. · You can use the buttons to choose a TV channel the VCR will receive, or choose the chapter the DVD player plays back. · Some models of DVD player use the buttons for both operating the fast forward/backward functions and for choosing the chapter. In this case, the / buttons do not work. 16 Teletext function Hold You can hold a teletext page on the screen for as long as you want, even while several other teletext pages are being received. Press the (Hold) button Hold indication VCR/TELETEXT/DVD switch Basic operation 1 Choose a TV channel with a teletext broadcast 2 Set the VCR/TELETEXT/DVD switch to the (TELETEXT) position 3 Press (Text) button to display the teletext Pressing (Text) button changes the mode as follows: TV mode Text mode To cancel the Hold function: Press the (Hold) button again. Sub-page Some teletext pages include sub-pages that are automatically displayed. 1 Choose a teletext page that includes sub-pages Sub-page numbers that can be viewed are automatically displayed at the top of the screen. 2 Press the (Subpage) button 3 Press the number buttons to enter sub-page number Reveal 4 Choose a teletext page by pressing the P buttons, number buttons or colour buttons To return to the TV mode: Press the (Text) button. · If you have trouble receiving teletext broadcasts, consult your local dealer or the teletext station. · The ZOOM function will not work in the Text mode. · You cannot operate menus when viewing a teletext programme. Some teletext pages include hidden text (such as answers to a quiz). Each time you press the (Reveal) button, text is hidden or revealed 17 Teletext function Size You can double the height of the teletext display. Press the (Size) button Index You can return to the index page instantly. [. . . ] · If the TV suddenly stops responding, disconnect the power cord of the TV from the AC outlet. Connect them to the AC outlet again to turn on the TV. If the TV returns to a normal state, it is not a failure. · When the picture is unstable, the screen may become white for a moment. This happens when the signal which drives the liquid crystal is missing. [. . . ]