User manual JVC MP-XV841US-MP-XV841

[. . . ] Mobile Mini Note PC MP-XV841US INSTRUCTIONS For Customer Use: Enter below the Model No. which is located on the bottom of the Mobile Mini Note PC. Retain this information for future reference. Serial No. LET0248-006A 2 EN Dear Customer, Thank you for purchasing this Mobile Mini Note PC. [. . . ] Each of these keys has two labels in different colors to identify their functions. (Blue characters printed on the diagonal part of the key are numeric keypad keys. ) To use the numeric keypad: Hold down the Fn key and press the NumLK key. When the numeric keypad is functional, the Num Lock lamp lights. (See the "Status indicators" on Page 19. Now, you can enter a numeral printed in blue on the diagonal part of the key. EN 57 If a Key Top Has Come Off If a key top has come off from the keyboard, put it back in place by following the procedure below. · How to attach the Enter key, left Shift key or Space key top 1 Take out the disengaged wire rod, and snag it onto the two projections as shown in the figure below. 2 Place the disengaged rubber cushion at the position shown in the figure below. 3 Align the center position of the key top with the center position of the rubber cushion, and press the key top down until it clicks into place. 4 Operate the key with its key top now in place as you would operate it normally, and check that it does not come off. Key top Rubber cushion Press down until it clicks into place. Wire rod · How to attach any other key top The wire rod shown above is provided with Enter key, left Shift key and Space key only. When the key top of any other key has come off, follow steps 2 to 4 above. Note · As soon as the key top clicks into place in step 3 of the procedure to attach the key top, do not apply any further pressure to it or the key may be damaged. 58 EN OPERATIONS (On/Off) key, you can perform a number of operations Using the center keys Using the center keys on the left of the in a single action. KEY LOCK SURROUND UNLOCK indicator Center keys KEY LOCK This disables operations to be performed using the DVD/CD function keys. When the UNLOCK indicator on the left of the DVD/CD function keys is off, it means that the operations you intend to perform using the DVD/CD function keys will be canceled. To use the DVD/CD function keys, press the KEY LOCK key among the center keys, and check that the UNLOCK indicator is lit. SURROUND This tool is specially designed to be used with InterVideo WinDVD 5 for JVC. While it is operating, the sound is switched by one setting in the following sequence each time the SURROUND key is pressed: OFF ¥ DVS (Dolby Virtual Speaker) ¥ DH (Dolby Headphone). · Dolby Virtual Speaker At this setting, you can listen to music recorded using the 5. 1 channel recording and playback system for home theaters through two virtual speakers. · Dolby Headphone At this setting, you can listen to virtual sound from headphones. Use these keys to change the screen brightness. Press 7 to make the screen darker and 6 to make it lighter. EN 59 Using the DVD/CD function keys By using the DVD/CD function keys at the bottom left of the keyboard, you can play DVDs or CDs in a single action. KEY LOCK DVD/CD function keys Volume control Caution When the UNLOCK indicator on the left of the DVD/CD function keys is off, it means that the operations you intend to perform using the DVD/CD function keys will be canceled. To use the DVD/CD function keys, press the KEY LOCK key among the center keys, and check that the UNLOCK indicator is lit. DVD/CD operations 8 49 2 6 Press this to stop DVD or CD play. Press this to start or temporarily stop DVD or CD play. Press this to move back to the previous chapter or title on the DVD or track on the CD. Press this to move ahead to the next chapter or title on the DVD or track on the CD. Volume control operations 1 You can turn up the volume by moving the volume control toward you or turn it down by moving the control away from you. [. . . ] *3 This is achieved by the dithering function. *4 The external display cable is required for the connection with the external monitor. Depending on the external monitor used, some modes may not be displayed. *5 Displayed on the external monitor only. [. . . ]