User manual JVC MXC55C-MX-C55 Instruction Manual

[. . . ] COMPACT COMPONENT SYSTEM MX-C55 ­ Consists of CA-MXC55 and SP-MXC55 ECO DISC SKIP CD CD3 FM/AM CD2 USB/AUX CD1 SP-MXC55 CA-MXC55 SP-MXC55 INSTRUCTIONS For Customer Use: Enter below the Model No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Serial No. LVT1541-004A [A] Warnings, Cautions and Others CAUTION To reduce the risk of electrical shocks, fire, etc. : 1. [. . . ] (See also page 17. ) · Playback order of the MP3/WMA files (tracks) recorded on a disc are determined by the writing (or encoding) application; therefore, playback order may be different from the one you have intended while recording the files and the folders. · This unit shows the file (track) names and the ID3v1/1. 1 tags (only "Title" and "Artist") on the display after the file starts play; however, there is a limitation on available characters and some file names and ID3v1/1. 1 tags are not shown correctly. More about MP3/WMA discs · MP3 discs (either CD-R or CD-RW) require a longer readout time. (It varies due to the complexity of the recording configuration. ) · When making an MP3 disc, select ISO 9660 Level 1 or Level 2 as the disc format. · This unit does not support multisession recording. · This unit can play MP3 files only with the following file extensions-- ". MP3, " ". Mp3, " ". mP3, " and ". mp3. " · Non-MP3/WMA files are ignored. If non-MP3/WMA files are recorded together with MP3/WMA files, this unit will take a longer time to scan the disc. It may also cause the unit to malfunction. · Some MP3/WMA discs may not be played back because of their disc characteristics or recording conditions. For Audio CD: For MP3/WMA disc: Playing Back CDs--All Disc and One Disc You can play all loaded CDs continuously--All disc playback, or one selected disc--One disc playback. All disc playback On the remote control ONLY: 1 Load CDs. · If the current playing source is not CD, press CD 6, then 7 before going to the next step. 13 Continued 2 Press REPEAT repeatedly until the ALL DISC indicator lights up on the display. ALL DISC indicator · When the playback mode is the TRACK mode (See also page 17. ); "current file name, track title and artist name" and "current track number and elapsed playing time" are displayed in order. Current file name, track title and artist name scroll. 3 Press one of the disc number buttons (DISC1, DISC2 or DISC3) for the disc you want to start to playback from. CD playback starts from the first track of the selected disc. · Pressing CD 6 instead of the disc number buttons starts playing back if a CD is on the tray. For Audio CD: Current track number Elapsed playing time Current track number* Elapsed playing time * In the TRACK mode, the unit manages files (tracks) on the MP3/ WMA disc only. Folders (albums) are not recognized. When the track includes the ID3v1/1. 1 tags, "Title" and "Artist" will scroll after the track title. · "<TITLE>" appears before the content of "Title" scrolls and "<ARTIST>" appears before the content of "Artist" scrolls. · For MP3/WMA disc, this unit can store the number of the track that you have stopped playback. By pressing CD 3 (CD 6 on the remote contorl), you can start playback again from the beginning of the same track--Resume play (see also page 17). To remove the disc, press 0. For MP3/WMA disc: · When the playback mode is the ALBUM mode (See also page 17. ); "current album number", "current file name, track title and artist name" then "current track number and elapsed playing time" are displayed in order. Current album number Current file name, track title and artist name scroll. CD playback sequence When 3 CDs** are loaded on the disc trays, they are played in one of the following sequences. · When CD1 is pressed : CD1 ] CD2 ] CD3 (then stops) · When CD2 is pressed : CD2 ] CD3 ] CD1 (then stops) · When CD3 is pressed : CD3 ] CD1 ] CD2 (then stops) ** When only 2 CDs are loaded, they are played in the same order, but the disc tray without a CD is skipped. Current track number of the current album Elapsed playing time · If 0 is pressed while one of the three discs is being played back, the playback of the disc is continued, while the other two discs are ejected. · During this time, DISC SKIP is unavailable. 14 One disc playback When 2 or 3 CDs are loaded on the disc trays, you can select one particular disc to be played back. Advanced CD Operations During the playback of CD, the following operations are available. On the remote control ONLY: 1 Load CDs. To skip to the another CD in the carrousel Press DISC SKIP on the unit. DISC SKIP · If the current playing source is not CD, press CD 6, then 7 before going to the next step. 2 Press REPEAT repeatedly so that the 1DISC indicator lights up on the display. 1DISC indicator To stop playback for a moment During playback, press 8. "PAUSE" appears on the display. When using the remote control, press CD 3/8. To locate a particular point of a track 3 Press one of the disc number buttons (DISC1, DISC2 or DISC3) you want to playback. Playback stops when all tracks of the selected disc are played once and resumes to All disc play. · For MP3/WMA disc, this unit can store the number of the track that you have stopped playback. By pressing CD 3 (CD 6 on the remote control), you can start playback again from the beginning of the same track-- Resume play (see also page 17). To exit from One disc playback, press REPEAT repeatedly so that ALL DISC indicator lights up on the display. The following operations will also cancel the One disc playback and restore All disc playback When the playback is stopped. [. . . ] · The AM loop antenna is too close to the unit. · The FM antenna is not properly extended and positioned. · The AC power cord is not plugged in. · No MP3 files are recorded on the disc. [. . . ]