User manual JVC MX-S6MD

[. . . ] COMPACT COMPONENT MD SYSTEM CA-MXS6MD STANDBY /ON ANIMATION COMPACT COMPONENT MD SYSTEM MX-S6MD DIMMER MENU DISC SP/LP2/LP4 LONG MODE REC MODE REC PAUSE COMPACT DISC LOADING MECHANISM TITLE/EDIT ENTER /DEMO PHONES LINE 2 LINE HIGH SPEED CD MD RM-SMXS6MDU REMOTE CONTROL DIGITAL AUDIO INSTRUCTIONS For Customer Use: Enter below the Model No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Serial No. LVT0529-001A [ US, UB ] Warnings, Cautions and Others Caution ­­ switch! [. . . ] See "Selecting the sound input level" on page 63. The remaining time required until re-recording will then appear in the main display. If this happens, press 7 after the remaining time appears. REMEMBER if you are trying to record a program including the same song (track) twice using high-speed recording, recording will stop at the beginning of the 2nd recording of the same song (track). ("HCMS CANNOT COPY" will appear in the main display. ) During high-speed recording You cannot listen to any source, and therefore, cannot adjust the volume level. ("CANNOT LISTEN!" will appear if you try to do. ) 3 Press LONG MODE on the unit if necessary. The recording length mode changes as follows: SP (Standard Play) LP2 (2 Times Long Play) LP4 (4 Times Long Play) · For the recording length mode, see "Stereo LongHour Recording (MDLP)" on page 33. 4 Press REC PAUSE on the unit (or MD REC PAUSE on the remote control). The REC PAUSE lamp on the unit starts flashing. 5 Press MD # / 8. The REC PAUSE lamp stops flashing and remains lit, and recording starts. · When recording an FM/AM broadcast: The station frequency will be recorded as the track title. ­ 34 ­ English Continued English 6 When recording a CD: Press CD # / 8. When recording from external equipment: Start playback. · For details, see the manual supplied with your equipment. To stop recording for a moment, press REC PAUSE (or MD REC PAUSE) again. To resume recording, press MD # / 8 again. (A track mark is recorded when you resume recording. ) To stop recording, press 7. "WRITING" flashes for a while. · When recording from a CD, both the CD player and the MD recorder stop. When recording from a CD using Standard Recording Two track marks may be recorded at the beginning of the recording. If this occurs, join these two track marks using the JOIN function described on page 42. You can use more useful and easier recording methods · For recording from CDs, see "Recording CDs -- CD Synchronized Recording" below. · For recording from the external equipment, see "Recording the External Equipment -- Sound Synchronized Recording" on page 38. All CDs Synchronized Recording 7Using the HIGH-SPEED CD 3 MD button on the unit This is the easiest way of CD recording. 1 Insert a recordable MD into the MD loading slot. 2 Prepare CDs. · After placing CDs, press CD # / 8, then 7 before going to the next step. · You can make a program (see page 22) or select Random play mode (see page 24) if you want. In this case, you cannot select the starting disc = go to step 4. 3 Press DISC to select the disc you want to start recording with. · Make sure that the correct disc number indicator is selected on the display. 4 Press LONG MODE on the unit if necessary. The recording length mode changes as follows: SP (Standard Play) LP2 (2 Times Long Play) LP4 (4 Times Long Play) · For the recording length mode, see "Stereo LongHour Recording (MDLP)" on page 33. 5 Press HIGH-SPEED CD 3 MD. The REC PAUSE lamp on the unit lights, and recording starts. Remaining playback time Recording CDs -- CD Synchronized Recording You have three methods to record from CDs onto an MD. Using the synchronized recording methods, you can start and stop CD play and MD recording at the same time. [. . . ] Extend FM antenna to the best reception position. Remove the obstruction. Unable to operate the remote control. · · · Loaded CDs and MD cannot be ejected. The CD skips. The batteries have lost their charge. · · · · Replace the batteries. [. . . ]