User manual JVC RC-EX30B

[. . . ] When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly. Do not expose this apparatus to rain, moisture, drippimg or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. [. . . ] To switch off the power supply completely Unplug the AC power cord from the AC outlet. If the batteries are inserted in the unit, take them out. Before operating the unit any further, first set the clock built in this unit. Note: If there is a power failure, the clock loses the setting and is reset to "0:00. " The clock indication will keep flashing until you set the clock again. 1 Press STANDBY/ON to turn off the unit, if it is turned on. Each time you press the button, the display changes the clock indication and the normal indication alternately. (Operating the unit while clock indication is displayed changes the display to the normal indication. 3 Press 4 or ¢ to adjust the hour, then press PROGRAM/CLOCK SET. You can press VOLUME + or VOLUME ­ on the remote control unit to increase or decrease the volume respectively. You can enjoy powerful bass sound with the Hyper-Bass Sound effect. Never use thinner, benzine, record cleaner or antistatic spray. 1 Press CD/RANDOM to enter CD mode, if the unit is in TUNER or TAPE mode. You can press CD/RANDOM on the remote control unit to enter CD mode. 3 Load a disc with the label side facing up and close the disc door. 8-cm CD can be played on the unit without an adapter. The current track number and elapsed playing time are displayed during playback. You can press STOP on the remote control unit to stop playback. Check that the disc has completely stopped rotating before unloading the disc. The following indication may be displayed when the disc is loaded upside down. You can press CD PLAY/PAUSE on the remote control unit to pause playback. If mistracking occurs during playback, lower the volume. [. . . ] When they become too dirty; · The sound output level drops. To avoid these, clean the heads, capstan and pinch roller every 10 hours of use. Head (recording/playback) Pinch roller Erasure head If the CD pickup lens is dirty, the sound may be degraded. Clean the heads, capstan and pinch roller. [. . . ]