User manual JVC RV-NB10B

[. . . ] POWERED WOOFER CD SYSTEM RV-NB10B/RV-NB10W INSTRUCTIONS LVT1539-003A [B] Warnings, Cautions and Others IMPORTANT for the U. K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. [. . . ] Press 4 twice quickly to skip to the beginning of the previous track. You can also select a track in stop mode with the same buttons. For CD: Selected track and its playback time are shown on the display. For MP3: Group and track numbers (then ID3 Tag if any) are shown on the display. To start playback, press CD 6. For MP3 discs: Search Play MP3 indicator Press and hold 4 or ¢ to fast forward/ reverse the disc during playback. You can quickly find a particular passage in the track you are listening to. During search play, you can hear the sound of approx. one forth level. · When playing an MP3 disc, the file name (then ID3 Tag if any) is displayed at the beginning of each track. · If no disc is inserted, "NO DISC" appears on the display and the system remains in stop mode. · The system automatically stops when the last track of the disc has finished playing. The following information for the disc is displayed. For CDs: Total track number Total playback time To locate a track directly Using the remote control only Press the number buttons to directly play a track. · To directly play track 5, press 5. · To directly play track 15, press +10 then 5. · To directly play track 20, press +10 once then press 10. (Only for MP3 discs) · To directly play track 109, press +100 once then press 9. · To directly play track 125, press +100, +10, +10 then 5. For MP3 discs: Total group number* Total track number To select a group (for MP3 disc) Using the remote control only Press GROUP UP or GROUP DOWN to select the group you want to play during playing the MP3 disc. · Press · Press GROUP UP to skip to the next group. GROUP DOWN to skip to the previous group. MP3 indicator * If a disc includes more than 99 groups, "G ­ ­" will appear on the display. To pause, press CD 6. The playback time flashes on the display. To cancel pause, press the same button again. Playback continues from the point where it was paused. Note: Do not turn the LOCK/RELEASE knob during playback. You can also select a group in stop mode with the same buttons. To play the group after selection, press CD 6. 11 Programming the playing order of the tracks Using the remote control only You can program up to 50 tracks in any desired order including the same tracks. You can only make a program when the system is stopped. [. . . ] Possible cause The power cord is not connected to an AC outlet. · Connections are incorrect, or loose. · MP3 disc is recorded with "packet writing. " Poor FM reception. The disc does not play ("NO PLAY" or "NO DISC" appears). [. . . ]