User manual JVC RVNB1C-RV-NB1 Instruction Manual

[. . . ] POWERED WOOFER CD SYSTEM RV-NB1 GROUP DOWN INSTRUCTIONS LVT1265-003B [B] Warnings, Cautions and Others IMPORTANT for the U. K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. [. . . ] · To directly play track 20, press +10 once then press 10. (Only for MP3 discs) · To directly play track 109, press +100 once then press 9. · To directly play track 125, press +100, +10, +10 then 5. For MP3 discs: Total group number* MP3 indicator * If a disc includes more than 99 groups, "G ­ ­" will appear on the display. Total track number To select a group (for MP3 disc) using remote control only While playing an MP3 disc, press GROUP UP or GROUP DOWN to select the group you want to play. · Press GROUP UP to skip to the next group. · Press GROUP DOWN to skip to the previous group. You can also select a group in stop mode with the same buttons. To play the group after selection, press CD 6. To pause, press CD 6. The playback time blinks on the display. To cancel pause, press the same button again. Playback continues from the point where it was paused. Note: Do not turn the LOCK/RELEASE knob during playback. 11 Programming the playing order of the tracks Using the remote control I You can program up to 50 tracks in any desired order including the same tracks. I You can only make a program when the system is stopped. I While making a program, you cannot specify a group number to select a track. Random play The tracks will play in no special order when you use this mode. Using the remote control 1. I Press PLAY MODE repeatedly to select "RANDOM". The RANDOM indicator lights up on the display. 1. I Press PLAY MODE repeatedly to select "PROGRAM". The system enters the programming mode and the PRGM indicator lights up. 5. I Press CD 6. The tracks are played in random order once. To skip a track during playback, press ¢ to skip to another track in the random sequence. The 4 button works only to go back to the beginning of the current track. While stopped: I To exit from random mode, press PLAY MODE repeatedly until the track number and total playback time appear on the display. Each time you press the button, the play mode changes as follows: Normal play = PROGRAM = RANDOM = (back to the beginning) 5. I Press the number buttons to select the track to program. · For detailed operations, see "To locate a track directly using the remote control only" on page 11. Example: for track 7, press 7. Program order number Last programmed track Repeating tracks (After 2 seconds) Total playback time of the programmed tracks* You can repeat the tracks or individual track as many times as you like. * Total playback time will not appear while making a program using an MP3 disc. Using the remote control Press REPEAT. [. . . ] Possible cause The power cord is not connected to an AC outlet. · Connections are incorrect, or loose. · MP3 disc is recorded with "packet writing. " Poor FM reception. The disc does not play ("NO PLAY" or "NO DISC" appears). [. . . ]