User manual JVC RV-NB20B

[. . . ] POWERED WOOFER CD SYSTEM RV-NB20B/RV-NB20W INSTRUCTIONS For Customer Use: Enter below the Model No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Serial No. LVT1614-001A [J] Warnings, Cautions and Others Mises en garde, précautions et indications diverses (For U. S. A. ) (For U. S. A. ) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] For CD: Selected track and its playback time are shown on the display. For MP3: Group and track numbers (then ID3 Tag if any) are shown on the display. To start playback, press CD 6. For MP3 discs: Search Play Press and hold 4 or x to fast forward/ reverse the disc during playback. You can quickly find a particular passage in the track you are listening to. During search play, you can hear the sound of approx. one forth level. MP3 indicator · When playing an MP3 disc, the file name (then ID3 Tag if any) is displayed at the beginning of each track. · If no disc is inserted, "NO DISC" appears on the display and the system remains in stop mode. · The system automatically stops when the last track of the disc has finished playing. The following information for the disc is displayed. For CDs: Total track number Total playback time To locate a track directly Using the remote control only Press the number buttons to directly play a track. · To directly play track 5, press 5. · To directly play track 15, press +10 then 5. · To directly play track 20, press +10 once then press 10. (Only for MP3 discs) · To directly play track 109, press +100 once then press 9. · To directly play track 125, press +100, +10, +10 then 5. For MP3 discs: Total group number* MP3 indicator * If a disc includes more than 99 groups, "G ­ ­" will appear on the display. Total track number To select a group (for MP3 disc) Using the remote control only Press GROUP UP or GROUP DOWN to select the group you want to play during playing the MP3 disc. · Press · Press GROUP UP to skip to the next group. GROUP DOWN to skip to the previous group. To pause, press CD 6. The playback time flashes on the display. To cancel pause, press the same button again. Playback continues from the point where it was paused. Note: Do not turn the LOCK/RELEASE knob during playback. You can also select a group in stop mode with the same buttons. To play the group after selection, press CD 6. 11 The tracks will play in no special order when you use this mode. Using the remote control only You can program up to 50 tracks in any desired order including the same tracks. You can only make a program when the system is stopped. While making a program, you cannot specify a group number to select a track. Using the remote control only 1. [. . . ] Action · Insert the plug into the socket. · Check all connections and make corrections. (See pages 5 and 6. ) · Disconnect the headphones. · Fully extend the FM telescopic antenna and turn it for the best reception. 17 Symptom · The track skips. [. . . ]