User manual JVC RX-430VBX

[. . . ] AUDIO/VIDEO CONTROL RECEIVER AUDIO/VIDEO-RECEIVER MIT STEUEREINHEIT AMPLI/TUNER DE COMMANDE AUDIO/VIDEO GEINTEGREERDE AUDIO/VIDEO-VERSTERKER RECEPTOR DE CONTROL DE AUDIO/VÍDEO RICEVITORE DI CONTROLLO AUDIO/VIDEO RX-430VBK TV /VIDEO /I TV VCR AUDIO CH+ 1 TEST 4 PRESET SEA MODE 2 3 CH­ DELAY SURR MODE 5 6 CD 7/P ­ 8 REAR + 9 TAPE CD-DISC AUDIO CONTROL ­ CENTER 10 +10 + MASTER VOLUME RX-430V AUDIO/VIDEO CONTROL RECEIVER TUNER/BAND PRESET SEA SOURCE SURROUND ADJUST SETTING FM/AM SEA SURROUND ON/OFF ON/OFF VCR TV TV CONTROL ­ + ­ VOLUME + ONE TOUCH OPERATION VIDEO MEMORY ONE TOUCH OPERATION PHONO ­ VOLUME + MUTE RM-SR430EU REMOTE CONTROL STANDBY POWER PHONES 1 SPEAKERS 2 ENHANCED COMPULINK CONTROL SYSTEM _ON --OFF STANDBY/ON _ON --OFF INSTRUCTIONS BEDIENUNGSANLEITUNG MANUEL D'INSTRUCTIONS GEBRUIKSAANWIJZING MANUAL DE INSTRUCCIONES ISTRUZIONI For Customer Use: Enter below the Model No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Serial No. LET0022-001A [EF, G] Warnings, Cautions and Others/Warnung, Achtung und sonstige Hinweise/ Mises en garde, précautions et indications diverses/Waarschuwingen, voorzorgen en andere mededelingen/Avisos, precauciones y otras notas/ Avvertenze e precauzioni da osservare IMPORTANT for the U. K. [. . . ] (The SLEEP indicator goes off. ) Turning off the power (into standby mode) also cancels the Sleep Timer. Selecting the Center Speaker Size You can register the information about the center speaker after all connections are completed. If you do this registration first, you do not have to adjust the center speaker mode when you want to activate the surround sound. However, to register the information, first you have to set the surround mode either to "PROLOGIC" or "3CHLOGIC. " (You cannot select the center speaker size when the surround mode is "OFF" or "HALL. ") On the front panel only: SURROUND 1. Press SURROUND so that the Control % / fi buttons work for selecting the surround mode. Press Control % / fi until "PROLOGIC" or "3CHLOGIC" appears on the display. The indicator of the selected mode also lights up on the display. Press SETTING so that the Control % / fi / @ / # buttons work for selecting the center speaker size. The lamp above the button lights up. SETTING 4. Press Control % / fi until "CNTR SPK" (Center Speaker) appears on the display. Press Control @ / # to select the appropriate item about your center speaker. Each time you press the button, the display changes to show the following: LARGE SMALL NO LARGE Select this mode when the size of the center speaker is the same as that of the front speakers. SMALL Select this mode when the size of the center speaker is smaller than that of the front speakers. NO Select this mode when you do not use a center speaker. (This mode cannot be selected when you select "3CHLOGIC. ") Note: This "center speaker size" setting is so related to the center mode setting for the Dolby Surround that changing this setting affects and changes the center mode to a relevant mode, and vice versa. For example; · If you select "LARGE, " the center mode is automatically set to "WIDE, " and vice versa. · If you select "SMALL, " the center mode is automatically set to "NORMAL, " and vice versa. · If you select "NO, " the center mode is automatically set to "PHANTOM" for PRO LOGIC, and vice versa. Page 14 English When the shut-off time comes, the receiver turns off (into standby mode) automatically. English One Touch Operation This receiver can memorize the optimum sound setting for each playing source. About the One Touch Operation JVC's One Touch Operation function is used to assign and store different sound settings for each different playing source. By using this function, you do not have to change the settings every time you change the source. The stored settings for the newly selected source are automatically recalled. The following can be stored for each source: · Volume level (see page 11) · Balance (see page 13) · Loudness (see page 13) · Preset SEA modes (see page 18) · Surround mode settings (see page 20) Note: If the source is FM or AM (MW/LW), the One Touch Operation function works only when preset channels from 1 -- 20 are turned in. You can assign a different setting for each preset channel. Using the One Touch Operation To store the sound settings: 1. The ONE TOUCH OPERATION lamp lights up, then the previously memorized settings are recalled and appear on the display in turn. [. . . ] · Refer also to the manuals supplied with your CD player and cassette deck. Page 27 You can operate JVC audio and video components with the receiver's remote control, since control signals for JVC components are preset in the remote control. To operate these components with the remote control, first select a source with the source buttons on the remote control. Then, operate that source using the remote control. IMPORTANT: To operate JVC audio components using this remote control: · You need to connect JVC audio components through the COMPU LINK-3 SYNCHRO jacks (see page 8) in addition to the connections using cables with RCA pin plugs (see page 7). · Aim the remote control directly at the remote sensor on the receiver. TV /VIDEO /I TV VCR AUDIO CH+ 1 TEST 4 PRESET SEA MODE 2 3 CH­ DELAY SURR MODE 5 6 CD 7/P ­ 8 REAR + 9 After pressing FM/AM, you can perform the following operations: FM/AM Alternates between FM and AM (MW/LW) 1 -- 10, +10 Selects a preset channel number directly For channel number 5, press 5. [. . . ]