User manual JVC RX-450 BK service manual

[. . . ] DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. [. . . ] The LOUDNESS indicator lights up on the display. · Select "OFF" to cancel it. The indicator goes off. Using the Sleep Timer Using the Sleep Timer, you can fall asleep to music and know the receiver will turn off by itself rather than play all night. Press SETTING so that the Control % / fi / @ / # buttons work for setting the Sleep Timer. Press Control % / fi until "<SLEEP>" appears on the display. Press Control @ / # to set the shut-off time. Each time you press the button, the shut-off time on the display changes as follows, and the SLEEP indicator lights up on the display. 10 20 30 40 50 (Canceled) 60 70 80 0 Page 13 SETTING To check or change the time remaining until the shut-off time: 1. Press SETTING if necessary, so that the Control % / fi / @ / # buttons work for setting the Sleep Timer. Press Control % / fi if necessary, until "<SLEEP>" appears on the display. The remaining time until the shut-off time appears in minutes. · To change the shut-off time, press Control @ / # repeatedly. The ONE TOUCH OPERATION lamp lights up, then the previously memorized settings are recalled and appear on the display in turn. Adjust the sound using the functions listed above. The newly adjusted settings are memorized. To recall the sound settings: With the ONE TOUCH OPERATION lamp lit, the settings for the currently selected source is recalled, and appears on the display when the source is selected. To cancel the One Touch Operation function: Press ONE TOUCH OPERATION so that the lamp goes off. (Even though the One Touch Operation function is canceled, the recalled sound effects remain active. ) ONE TOUCH OPERATION ONE TOUCH OPERATION On the front From the remote control panel Page 15 You can browse through all the stations or use the preset function to go immediately to a particular station. Tuning in Stations Manually On the front panel only: TUNER/BAND 1. Press TUNER/BAND so that the Control % / fi / @ / # buttons work for tuner settings. The indicator above the button lights up. Press Control % / fi until "<FM AM>" appears on the display. Each time you press the button, the band alternates between FM and AM (MW/LW). Press Control % / fi until "­TUNING+" appears on the display. [. . . ] Notes: · During synchronized recording, the selected source cannot be changed. · If your CD player is playing in program mode, a 4-second blank is recorded between tracks so that the music scan feature of your cassette deck can be used on the recorded tape. · If the power of any component is shut off during synchronized recording, the COMPU LINK remote control system may not operate properly. In this case, you must start again from the beginning. [. . . ]