User manual JVC RX-DP20VBK

[. . . ] Which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Do not expose this appliance to rain or moisture. [. . . ] If any of "COMPO 1/2/3" is selected for the video component which is only connected using S-video or composite video jacks (S/C), you cannot view or record its playback picture. With "ZONE2PREOUT" set to "VARIABLE, " no sounds come out of the ZONE 2 PREOUT jacks if the volume level is set to "­ ­ ­ dB. " In this case, increasing the volume level will enable the sound output through the ZONE 2 PREOUT jacks. 7 SPEAKER 2 When using the FRONT 2/ZONE 2 SPEAKERS terminals, determine the speaker terminal usage: SPEAKER 2 : Select to connect the second front speakers in Zone 1. zONE 2 SPK : Select to connect the front speakers in Zone 2. BI-AMP OUT : Select to connect the front speakers in Zone 1 using bi-amplifier connection*. The BI-AMP indicator (as well as the front speaker 1 indicator) will light up when the front speakers 1 are activated. When you have connected an MD recorder or CD player equipped with the TEXT COMPU LINK remote control system (see page 63), you can show text information, such as disc title or track title, on the display of this receiver. * If your speaker has two pairs of input terminal (one for the high frequency range and the other for the low frequency range), you can connect the speakers by using both the FRONT 1 SPEAKERS and FRONT 2/ZONE 2 SPEAKERS terminals on the rear of this unit. When "BI-AMP OUT" is selected, the surround back speakers are automatically deactivated. In this case, the SURR CH OUT submenu cannot be adjusted (see page 42). Though you have selected "TEXT, " the source name and Surround/THX/DSP mode will appear while playing a disc that has no text information. This unit memorizes many settings separately for each source (see page 28). In addition, you can store the volume level for each source together with the other memorized settings. You can select whether or not to superimpose the menus on the playback pictures on the TV screen. 7 SUPERIMPOSE Turn on or off superimpose: ON : Select to superimpose the menus on the playback pictures on the TV screen. 7 ONE TOUCH OPE Select one of the following to store the volume level for each source: ON : Select to store the volume level setting separately for each source. When you turn on the power, · OFF : Select not to store the volume level setting. If a video component and this unit are connected only using component cords, Superimpose will not work. While Superimpose is in use, the menus may fluctuate or may be distorted depending on the playback pictures. To recall the volume level With the ONE TOUCH OPERATION indicator lit, the volume level for the currently selected source is recalled when the source is selected. Sound adjustment operations are only possible while the receiver is ready for Zone 1 operations. [. . . ] RMS, driven into 4 , 20 Hz to 20 kHz with no more than 0. RMS, driven into 8 , 20 Hz to 20 kHz with no more than 0. RMS, driven into 8 , 20 Hz to 20 kHz with no more than 0. RMS, driven into 8 , 20 Hz to 20 kHz with no more than 0. [. . . ]