User manual JVC TD-EX90

[. . . ] CASSETTE DECK TD-EX90 TD-EX90 CASSETTE DECK REC PAUSE CD REC AUTO REVERSE STANDBY B DOLBY C REC DOLBY REVERSE NR MODE POWER INSTRUCTIONS For Customer Use: Enter below the Model No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Serial No. LVT0091-001A [J] Warnings, Cautions and Others CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION To reduce the risk of electrical shocks, fire, etc. : 1. [. . . ] 2 Press REVERSE MODE to switch the reverse mode on. Press so that the reverse mode indicator () lights up. 3 Prepare recording of the associated components. · The recording in the reverse mode stops after completing recording in the TM direction. Be sure to start recording from the £ direction. · When the reverse mode is switched off, recording stops after having recorded onto one side of tape. Note: The side erasure tab is removed (refer to P. 19) will not be recorded even though the reverse mode is swithed on. To record audio using Dolby NR The Dolby NR is used to record audio to reduce hiss noise when the tape is played back later. The Dolby NR includes type B for popular use and type C for even improved noise reduction effect. Press DOLBY NR so that either the B or C indicator lights up. DOLBY B NR DOLBY C NR (Indicator lit) (Indicator lit) Off (Canceled) · A tape recorded using Dolby NR should be played back using the Dolby NR of the same type as that used in recording. The audio quality will be affected if a different type is used in playback. 13 TD-EX90 CD synchronized recording CDs can be recorded with a simple, one-touch operation. By using the features of the CD player you can easily create an original tape of your favorite music. Be sure to make the Compu Link connection among the EX series components. 1 Load the tape for use in recording. Press 0 to open the tape tray, place a tape on it and press 0 to close it. · It is not possible to record onto a cassette tape with the broken accidental erasure tab. Use a cassette the tab of which is not broken. · If you want to record music on both sides of tape continuously, switch the reverse mode on (see page 13). · If you want to use Dolby Noise Reduction, press DOLBY NR to select B or C (see page 13). 2 Prepare the CD player. Load CDs, press CD 1, 2 or 3 according to the disc you want to record, and press &/CANCEL of the CD player. Now set the CD player to the program play mode, etc. , as required. * Refer to the instruction manual of the CD player for the CD player operating procedures. REC PAUSE CD REC 3 Press CD REC. The CD player and cassette deck start simultaneously and synchronized recording starts. · During recording, the CD source is selected automatically by the amplifier/tuner. · During recording, the amplifier/tuner's input source cannot be changed even by pressing its INPUT. To stop recording: Press &/CANCEL of the CD player to stop recording. The cassette deck will stop after leaving a non-recorded blank of 4 seconds. If you want to stop recording immediately, press 7 of the cassette deck. 14 TD-EX90 MD synchronized recording Synchronized recording makes it possible to start cassette recording in synchronism with the playback of the MD recorder. [. . . ] WHAT YOU MUST DO FOR WARRANTY SERVICE: Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized service center, please call toll free: (800)537-5722. If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of your bill of sale plus and letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location of which will be given to you by the toll-free number. If you have any questions concerning your JVC Product, please contact our Customer Relations Department. [. . . ]