User manual JVC TH-A10

[. . . ] DVD DIGITAL CINEMA SYSTEM TH-A10R Consists of XV-THA10R, SP-PWA10, SP-XCA10, and SP-XSA10. SP-XSA10 SP-XCA10 SP-XSA10 SP-PWA10 XV-THA10R INSTRUCTIONS For Customer Use: Enter below the Model No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Serial No. LVT0516-001A [B] Warnings, Cautions and Others IMPORTANT for the U. K. [. . . ] To activate the PBC function when a PBC-compatible Video CD disc is being played back without the PBC function, press STOP then press PLAY. You can also activate the PBC function using the on-screen display as follows. Use 5/ cursors to move the pointer to [PBC CALL], then press ENTER. If you want to playback a PBC-compatible Video CD disc without activating the PBC function, start playback by using the number buttons instead of the PLAY button. 1 1. Use the number buttons (1~10, +10) to select the desired title or track number. Selecting numbers Selecting 1~10: Press the relevant button between 1 and 10. Selecting 11 or higher: To select 13: Press +10 = 3. To select 40: Press +10 = +10 = +10 = 10. The specified title or track number appears in the display window, and playback begins from that location. You can also see the selected title or track number on the onscreen display. Notes: When appears on the TV screen. The title or track you have selected is not contained in the disc. This function does not work during Video CD playback with PBC function. 25 Using the DVD player To play from the beginning of a title, chapter, or track The beginning of previous or later chapters or tracks may be skipped. 7 For DVD: During playback For Audio CD: Any time For Video CD: During playback without PBC function 2. Use 5/ cursors to move the pointer to [CHAP. SEARCH], then press ENTER. The color of [CHAP. SEARCH] changes and "GO TO CHAPTER:" appears in the message area. From the remote controls: Primary remote control Secondary remote control Message area 3. Use the number buttons (0~9) to enter the desired chapter number. The selected chapter number appears in the message area. Example: To select chapter number 8: Press 8. To select chapter number 37: Press 3 = 7. 1 1. Press or 4. 1 4. Press ENTER. The unit starts playback from the selected chapter. Press the required number of times to move to a later chapter or track. Press 4 the required number of times to return to the previous chapter or track. Press 4 once to return to the beginning of the chapter or track currently playing. To return the regular display: Press DVD ON SCREEN. Notes: This function may not work with some DVD discs. This function does not work during Video CD playback with PBC function. Press or 4 on the center unit for the same operation. Notes: When the chapter number is incorrect in step 3: Overwrite the incorrect number with the correct number. When is displayed in the TV screen in step 4: The chapter you have selected is not contained in the disc, or chapter search does not work on the disc. With some discs, the unit automatically starts searching for the chapter after entering the chapter number in step 3. To specify the chapter number for playback [CHAP. SEARCH] If the current title of a DVD disc being played is divided into chapters, you can skip to a desired chapter by specifying the chapter number using the on-screen display. [. . . ] Connect the center unit and TV directly. Run through initial setup again correctly. Connect an external FM antenna, or contact your dealer. Switch power off, and remove and re-insert the power plug in the socket. [. . . ]