User manual JVC TH-SW9B

[. . . ] DVD DIGITAL CINEMA SYSTEM Consists of XV-THSW9, RX-THSW8, SP-PWSW9, SP-THS9F, SP-THS9C and SP-THS9S Consists of XV-THSW8, RX-THSW8, SP-PWSW8, SP-THS5F, SP-THS5C and SP-THS7S INSTRUCTIONS LVT1150-003C [B] Warnings, Cautions and Others IMPORTANT for the U. K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. [. . . ] All Channel Stereo can be used while reproducing 2 channel stereo source. Normal stereo sound All Channel Stereo See page 25 for button locations. 7 When playing back 2 channel source You can select either mode of Dolby Pro Logic II (PL II MOVIE/ PL II MUSIC) or the DSP (ALL CH ST. ) mode. Press SURR. repeatedly to select the desired mode. The surround mode is turned on and the current surround mode appears on the display window. Each time you press the button, the surround mode changes. To turn off the surround mode 7 Indicators on the display window Digital signal format indicators PPCM: Lights when DVD AUDIO packed PCM signals comes in. LPCM: Lights when Linear PCM signal comes in. GD: Lights when Dolby Digital signals come in. C: Lights when DTS Digital (Surround) signals come in. No indication: No digital signal indicator lights when analog signals come in. Dolby Surround/DSP mode indicators GPLII: Lights when Dolby Pro Logic II mode is activated. DSP: Lights when All Channel Stereo mode is activated. a: Lights when the left channel signal comes in. b: Lights when the center channel signal comes in. c: Lights when the right channel signal comes in. d: Lights when the LFE channel signal comes in. g: Lights when the surround left channel signal comes in. i: Lights when the surround right channel signal comes in. h: Lights when the monaural surround channel signal or 2 channel Dolby Surround signal comes in. The channel with " " shows that the corresponding speakers are reproducing the channels' sound. If the channels' sound decoded into 5. 1 channel is reproduced, only " " lights. Press SURR. repeatedly until SURR OFF appears on the display window. Storing adjustments -- auto memory When you turn the power off, the system memorizes the current surround mode. The memorized mode is automatically recalled when you turn the power on. NOTE · When FM or AM is selected as the source, you cannot select any surround mode. [. . . ] · Since the system may deteriorate in quality, become damaged or get its paint peeled off, be careful about the following. · DO NOT wipe it with a hard cloth. · DO NOT wipe it with thinner or benzine. · DO NOT apply any volatile substance such as insecticides to it. [. . . ]