User manual JVC TM-H150CG-U-TM-H150 Instruction Manual

[. . . ] COLOR VIDEO MONITOR ENGLISH LCT1564-001A-H BEDIENUNGSANLEITUNG : FARB-VIDEO-MONITOR MANUEL D'INSTRUCTIONS : MONITEUR VIDEO COULEUR MANUALE DI ISTRUZIONI : MONITOR VIDEO A COLORI INSTRUCCIONES : MONITOR DE VIDEO A COLOR For Customer Use: Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference. Pour l'usage du client: Enter ci-dessous le numéro de série qui est situé sur l'arrière du coffret. [. . . ] POSITION WHITE BALANCE Adjusts contrast. Adjusts hue. Adjusts the horizontal position of the screen. Adjusts the vertical position of the screen. DRIVE: Adjusts the cut-off point of the red signal. Adjusts the cut-off point of the green signal. Adjusts the cut-off point of the blue signal. Adjusts the drive level of the red signal. Adjusts the drive level of the blue signal. CONTROL LOCK STATUS DISPLAY REMOTE SYSTEM INPUT REMOTE3) 2) 3) Prohibits the monitor operations except turning on/off the monitor and adjusting volume. The menu operations are also prohibited. Selects to display or not to display the color system of the current input on the screen. Selects the method of the external control connected to the REMOTE terminal. Sets how to change the input when operating the monitor by the external control. May not appear depending on the type of input signal. Appears only when "REMOTE SYSTEM" is set to "MAKE. " 10 7 Displaying the menu screens To display MENU Press the MENU button on the front panel. To display SET-UP MENU Press the fi button while holding down the MENU button on the front panel. · To go back to the previous menu, press the MENU button. · To exit from the menu screen, press the MENU button several times. NOTE: The menu screen will disappear if no operation has been done for about 5 minutes. 7 Initializing the Settings You can initialize the following settings of the monitor: MENU, SET-UP MENU, picture adjustment, volume level 1 2 Press the stand-by button to turn off the monitor (on stand-by). While holding down both the MENU button and the fi button, press the standby button to turn on the monitor. NOTE: Keep pressing both the MENU button and the fi button until "<SET-UP MENU> RESET" appears on the screen. 7 Menu Operation Procedure Example: When adjusting "APERTURE" to "+10. " "<SET-UP MENU> RESET" appears on the screen. 1 Press the MENU button. <MENU> APERTURE ADJ. LEVEL RUSH DELAY EXIT : 00 : LOWER : 9300 : AUTO : 00 : STD. 3 Press the VOLUME/SELECT (+) button to initialize the settings. The settings are initialized and "<SET-UP MENU> RESET" disappears. · To cancel to initialize, press the MENU button. 2 Press the %/fi button to select "APERTURE. " <MENU> APERTURE ADJ. LEVEL RUSH DELAY EXIT Initial settings Functions (Items) Initial settings 00 LOWER 9300 AUTO 00 STD. 00 00 00 00 00 00 00 00 00 00 00 OFF ON MAKE A-D 00 00 00 00 20 APERTURE ADJ. DRIVE CONTROL LOCK STATUS DISPLAY REMOTE SYSTEM INPUT REMOTE CHROMA PHASE CONTRAST BRIGHT VOLUME : 00 : LOWER : 9300 : AUTO : 00 : STD. MENU 3 Press the VOLUME/SELECT (­ +) buttons to adjust "APERTURE. " <MENU> APERTURE ADJ. LEVEL RUSH DELAY EXIT : +10 : LOWER : 9300 : AUTO : 00 : STD. SET-UP MENU 4 Press the MENU button to exit from MENU. Picture Adjustment Volume 11 ENGLISH MENU appears on the screen. How to Use MENU <MENU> APERTURE ADJ. [. . . ] Has the correct INPUT been selected on the monitor?Has the correct color system been selected?Has "BLUE CHECK" or "COLOR OFF" been activated?Unnatural picture Has "CONTRAST" or "BRIGHT" been changed? 11, 14 7 5, 7 12 4, 5 4, 13 Shaking picture Is the monitor close to a motor, transformer or any other device generating a strong magnetic field? [. . . ]