User manual JVC TM-H1750CG-U-TM-H1750 Instruction Manual

[. . . ] TM-H1750CG OPERATING INSTRUCTIONS [ TM-H1750CG/E / TM-H1750CG/U ] COLOR VIDEO MONITOR ENGLISH ASPECT A B C SLOT D BEDIENUNGSANLEITUNG : FARB-VIDEO-MONITOR MANUEL D'INSTRUCTIONS : MONITEUR VIDEO COULEUR MANUALE DI ISTRUZIONI : MONITOR VIDEO A COLORI INSTRUCCIONES : MONITOR DE VIDEO A COLOR !"#$%&'(&) Pour l'usage du client: Enter ci-dessous le numéro de série qui est situé sur l'arrière du coffret. Conserver cette information pour une référence ultérieure. : Numéro de modèle : Serial No. : Numéro de série : TM-H1750CG CHROMA CONTRAST VOLUME/SELECT MENU UNDER SCAN COLOR OFF BLUE CHECK POWER TM-H1750CG PHASE BRIGHT INPUT SELECT LCT1025-001A-H 1101-Y-U-JMT Jan. [. . . ] LEVEL has been initialized when a component signal is input. CONTRAST/ BRIGHT Reverse selection mark (4) select. 3 Setting display: Indicates the current settings (value). 4 Function display: The functions of the front panel buttons (5 buttons on the left) correspond to the function displayed. Input the standard color-bar signal for your TV system and display it on the screen. Press the CHROMA button to adjust the chroma so that the blue bars on the left and right sides of the screen have the same brightness. (Only when an NTSC signal is input) Press the PHASE button to adjust the phase so that the two blue bars at the center of the screen have the same brightness. (Only when an NTSC signal is input) Repeat procedures 3 and 4 for the adjustment so that all four blue bars on the screen have the same brightness. When you have finished making the adjustment, press the BLUE CHECK button to deactivate. 3. Press the VOLUME/SELECT buttons to set. Blue Blue VOLUME/SELECT Contents Forward the menu item. Reverse the menu item. Blue Blue Front panel button VOLUME/ SELECT (+) VOLUME/ SELECT (­) Function displayed + Contents Increase (to max. value) Forward the setting value Decrease (to min. value) Reverse the setting value Setting range 00 +01 ············ +39 +40 4 ­ ­ + Lower the adjustment value. (to the minimum) Raise the adjustment value. (to the maximum) Forward the setting value. Exits the <MENU> screen. UPPER 1 Menu items APERTURE ADJ. BAR POSI COLOR TEMP. LEVEL* RUSH DELAY Purpose Picture aperture level Volume bar position Color temperature of white balance Color system Component level Delay time LOWER 6500 AUTO 4 1 EXIT Initializing COMPO. LEVEL (when a component signal is input) with the IF-C01COMG component/RGB input card inserted When a component signal is input, be sure to adjust (initialize) the COLOR offset in COMPO. LEVEL. UPPER 9300 NTSC AUTO PAL <ADJ. BAR POSI> screen BRIGHT : 00 [Procedure] 1. Input the standard color-bar signal for your TV system and display it on the screen. LEVEL in the <MENU> screen and then adjust it with VOLUME +/­ buttons so that the blue bars on the left and right sides of the screen have the same brightness. Quit the <MENU> screen and press the BLUE CHECK button. [. . . ] Function buttons on the front panel do not function. The INPUT SELECT buttons do not function. Is the monitor close to a speaker, magnet or any other device generating a strong magnetic field?Is the aspect ratio set to 16:9? Has the UNDER SCAN button been pressed so the UNDER SCAN button lights?(Has the CONTROL LOCK function been set to ON?) Is input selection under external control? [. . . ]