User manual JVC TU-DB1SK

[. . . ] CONTENTS Safety Precautions In the box Over Air Download STB buttons Remote control buttons 2 3 3 4 5 Preparation Connections Switching on Inithial settings Everyday Operation Changing Channels Channel List Electronic Programme Guide Digital Teletext Widescreen Advanced Operation Configuring Your Receiver Editing The Channel List Channel and Menu Protection Favourite Channels Programme Reminders and Timers Installation 7 7 8 8 9 9 10 10 11 12 12 12 13 14 15 15 16 Specification Connecting the external devices Troubleshooting Guide 18 19 20 -1- SAFETY PRECAUTIONS POWER Always use the provided AC adapter. Operate only from the power source specified (AC 100-240 V, 50/60Hz) on the AC adapter. In using, the AC adapter get heat on the surface of the case. Do not be covered with any material on case of AC adapter while it is in operation. [. . . ] Subtitle With Digital terrestrial broadcasting, some programmes are broadcast with subtitles. Subtitles can be displayed when watching these programmes. When the set-top box is in DIGITAL TV mode, this time the TV scart is switched on and the TV is switched to AV/RGB mode. And also, when there is no menu on the screen , pressing TV/DTV key will manually toggle the set top box between VCR mode and TV mode. In VCR mode set top box will display the output of VCR device , In TV mode set top box displays its own outputs. If box scart mode is not changed by pressing TV/DTV key , scart mode will be automatically detected . (For example if a dvd player is connected to VCR scart and powered on , then the set top box will immediately switch to VCR mode. The set top box will switch to TV mode if dvd player is switched off ) ADVANCED OPERATION CONFIGURING YOUR RECEIVER Many aspects of your receiver can be set up to reflect your circumstances and preferences. The Configuration menu screen is accessed from the Main Menu. Press the [MENU] key to display the Main Menu and the [DOWN] key twice to highlight Configuration, then press [OK] to display the Configuration menu screen. 8PIADBVS6UDPI 8uhtrTrGhthtr Hr TV / DTV Key If there is no connected VCR device, The TV/DTV key is used to switch TV and DIGITAL TV modes. When the set-top box is in TV mode, the TV scart is not switched and the TV operates in analog mode. The various configuration functions are displayed in a list, along with a quarter-screen image of the currently selected channel. You can select a function by highlighting the corresponding menu line with the [UP] or [DOWN] keys. There are seven configuration functions. - 12 - SYSTEM Use LEFT/RIGHT buttons to toggle System Menu Language. COUNTRY Use LEFT/RIGHT buttons to toggle Country options. Audio Language Digital terrestrial television channels can broadcast simultaneous soundtracks in more than one language. This function selects which language soundtrack you will hear when switching to a channel broadcasting with multiple soundtracks. See also Section 2 - EVERYDAY OPERATION - Audio Control. Highlight the Audio Language line in the Configuration menu and use the [LEFT] or [RIGHT] keys to cycle through the language options of English, Welish or Gari. Return No Menu to normal TV viewing by pressing the [MENU] key. Subtitle Language Digital terrestrial television channels can broadcast with subtitles displayed on-screen for the hard-ofhearing. This function selects the desired subtitle language and enables the automatic display of subtitles whenever subtitle information is broadcast. Highlight the Subtitle line in the Configuration menu and use the [LEFT] or [RIGHT] keys to cycle through three language options of English, Welish or Garic. Return NO MENU to normal TV viewing by pressing the [MENU] key. [. . . ] When [OK] is pressed, the receiver searches that frequency and display a list of the channels found. Before returning to the Installation menu. Hint Highlight the YES button with the [LEFT] or [RIGHT] key and press [OK] to erase all the channels and settings and switch the receiver to standby. You can now start again as detailed in - PREPARATION Initial settings on page 8. [. . . ]